Datasheet

ManualsBrandsBrady ManualsLabel Printer ConsumablesLabel Roll, Metallised Polyester, 38.1 x 12.7mm, 360pcs, Silver

BRADY B-428 THERMAL TRANSFER PRINTABLE METALLIZED

POLYESTER LABEL STOCK

TDS No. B-428

Effective Date: 2006-09-26

Description:

GENERAL

Print Technology: Thermal Transfer

Material Type: Metallized Polyester (3 mil film)

Finish: Matte

Adhesive: Permanent Acrylic

APPLICATIONS

Designed for applications, like rating and serial plates, that utilize barcodes, alphanumerics, graphic symbols and

logos and require nameplate-like quality.

RECOMMENDED RIBBONS

Brady Series R4300

Brady Series R6200 (alternate)

REGULATORY/AGENCY APPROVALS

UL: B-428 is a UL Recognized Component when printed with the Brady Series R4300 Ribbon. See UL file MH17154

for specific details. UL information can be accessed online at UL.com. Search in Certifications area.

CSA: B-428 is a CSA Accepted material when printed with the Brady Series R4300 Ribbon or R6200 Ribbon. See

CSA Acceptance Record LS 41833 for specific details. CSA information can be accessed online at directories.csa-

international.org.

DIN VDE 0472 Part 815: Brady B-428 meets the requirements of a halogen-free material per DIN VDE 0472 part 815.

(Statement based on review of product construction and confirmatory halogen content test run at an independent test

laboratory.)

Brady B-428 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.

SPECIAL FEATURES

B-428 is designed to withstand numerous solvents and variable temperatures when applied to various surfaces.

Details:

PHYSICAL PROPERTIES

TEST METHODS

AVERAGE RESULTS

Thickness

ASTM D 1000

-Substrate

-Adhesive

-Total

0.0034 inch (0.086 mm)

0.0010 inch (0.026 mm)

0.0044 inch (0.112 mm)

Adhesion to:

-Stainless Steel

-Polypropylene

ASTM D 1000

20 minute dwell

24 hour dwell

20 minute dwell

24 hour dwell

30 oz/in (33 N/100 mm)

40 oz/in (43 N/100 mm)

12 oz/in (13 N/100 mm)

20 oz/in (22 N/100 mm)

Tack

ASTM D 2979

Polyken™ Probe Tack

1 second dwell

28 oz (789 g)

Summary of content (4 pages)

PAGE 1
BRADY B-428 THERMAL TRANSFER PRINTABLE METALLIZED POLYESTER LABEL STOCK TDS No. B-428 Effective Date: 2006-09-26 Description: GENERAL Print Technology: Thermal Transfer Material Type: Metallized Polyester (3 mil film) Finish: Matte Adhesive: Permanent Acrylic APPLICATIONS Designed for applications, like rating and serial plates, that utilize barcodes, alphanumerics, graphic symbols and logos and require nameplate-like quality.
PAGE 2
Performance properties tested on printed B-428 labels laminated to aluminum panels. Samples thermal transfer printed with alphanumerics, and 5 mil and 10 mil minimum X dimension barcodes using a Series R4300 ribbon and a BradyPrinter™ THT Model 203 Thermal Transfer Printer. PERFORMANCE PROPERTIES High Service Temperature TEST METHODS 30 days at various temperatures Low Service Temperature Humidity Resistance UV Light Resistance Weatherability 30 days at -40°F (-40°C) 30 days at 100°F (37°C), 95% R.H.
PAGE 3
CHEMICAL REAGENT Methyl Ethyl Ketone 1,1,1-Trichloroethane Toluene Mineral Spirits JP-8 Jet Fuel SAE 20 WT Oil SAE 20 WT Oil @ 70C IPA ASTM #3 Mil 5606 oil Skydrol® 500B Super Agitene® Deionized Water 3% Alconox® Detergent 10% Sulfuric Acid Solution 10% Sodium Hydroxide Solution SUBJECTIVE OBSERVATION OF VISUAL CHANGE (R6200 RIBBON) EFFECT TO EFFECT TO EFFECT TO PRINT LABEL STOCK PRINT WITH RUB No visible effect No visible effect Moderate print removal No visible effect No visible effect Moderate print re
PAGE 4
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.