User guide

7- 16 LOCKOUT-PRO
TM
ENTERPRISE User Guide
Change Defaults for Energy Source Checks
The Combined Form provides space to include a method for checking whether a given energy source
is fully locked out after completion of a step. You can select from a default list of common checks. You
can also add to the list, edit the existing checks, or remove checks from the list.
To add a lockout check to the default list:
1. In the Set Defaults window, select Lockout Steps.
2. In the Checks section of the window, click New.
3. In the Add/Edit Checks window, enter the check procedure in the Name box.
4. Click OK to add the check to the list of checks in the Set Defaults window.
5. Click OK to save your changes or Cancel to discard them.
To modify a lockout check on the default list:
1. In the Set Defaults window, select Lockout Steps.
2. In the Checks section, click Edit.
3. In the Add/Edit Checks window, enter your changes in the Name text box.
4. Click OK to save the changes and return to the Set Defaults window.
5. Click OK to save your changes or Cancel to discard them.
To remove a lockout check from the default list:
1. In the Set Defaults window, select Lockout Steps.
2. In the Checks section, click the lockout check on the list that you want to remove, then
click Remove.
Note: If you accidentally remove a check, click Cancel on the Set Defaults window. The
window will close, and when you return, the check will be restored.
3. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
Text for Checks
Attempt to restart at control panel.
Open drain valve to dissipate pressure.
Verify gauge pressure reads zero.
Verify zero voltage reading with meter.