User guide

7- 12 LOCKOUT-PRO
TM
ENTERPRISE User Guide
Change Lockout Device Defaults
To add a lockout device to the default list:
1. In the Set Defaults window, select the Basic Data tab.
2. In the Devices section, click New.
3. In the Add/Edit Devices window, enter the lockout device in the Name box.
4. Click OK to add the device and return to the Set Defaults window.
5. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
To modify a lockout device on the default list:
1. In the Set Defaults window, select the Basic Data tab.
2. In the Devices section of the window, click the device name you want to edit, then click Edit.
3. In the Add/Edit Devices window, enter your changes in the Name text box.
4. Click OK to return to the Set Defaults window.
5. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
To remove a lockout device from the default list:
1. In the Set Defaults window, select the Basic Data tab.
2. In the Devices section of the window, click the name of the device on the list that you want to
remove, then click Remove.
Note: If you accidentally remove a device, click Cancel on the Set Defaults window. The
window will close, and when you return, the device will be restored.
3. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
Name
Ball valve lockout Lock
Cable lockout Lock and chain
Chain Lock and hasp
Circuit breaker lockout Pneumatic disconnect lockout
Electrical plug lockout Universal ball valve lockout
Fuse blockout Wall switch lockout
Gas cylinder lockout Die block
Gate valve lockout Pin