User guide

LOCKOUT-PRO
TM
ENTERPRISE User Guide 7- 7
Energy Source Description Defaults
The follow list are the default descriptions for energy source labels.
To add an energy source description to the default list:
1. In the Set Defaults window, select the Energy Sources tab.
2. Under the Descriptions box displaying the current list of defaults, click New.
3. In the Add/Edit Descriptions window, enter the description in the Name box.
4. Click OK. The Add/Edit Descriptions window will close and the description will be added to the
bottom of the list.
5. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
To modify an energy source description on the default list:
1. In the Set Defaults window, select the Energy Sources tab.
2. In the Descriptions box, click the description you want to change, then click Edit.
3. In the Add/Edit Descriptions window, enter your changes in the Name box.
4. Click OK. The Add/Edit Descriptions window will close and the revised description will display in
the list.
5. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
To remove an energy source description from the default list:
1. In the Set Defaults window, select the Energy Sources tab.
2. In the Descriptions box, click the description you want to remove.
3. Click Remove. The description will be removed from the display.
Note: If you accidentally remove a description, click Cancel on the Set Defaults window.
The window will close and when you return, the description will be restored.
4. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
Default Energy Source Descriptions
Primary Feed
Secondary Feed
xx volts
xx psi
Inlet
Discharge
Supply
Return