User guide
LOCKOUT-PRO
TM
ENTERPRISE User Guide 5-
23
Images
In this section, you can add up to 3 images to the Combined Form. They will display above the table of
energy sources. You can add labels to the images to indicate control points or other features.
To add an image:
1. In the Procedure Sections panel, click Images.
- or -
From the Main Menu, select Edit>Images.
2. In the Edit Image window, click the tab at the top (Image 1, Image 2, or Image 3) for the image you
want to add.
Note: If no images have been added, the window will default to Image 1 with no content.
3. To locate the folder where your images are stored, click Browse....
4. When you locate your image, double-click on it. It will be copied into the Edit Image window.
Note: To edit and label the image, follow the steps in the procedure, Working with
images on page 5-27.
5. To add another image, click the next image tab and repeat steps 3-4.
6. When finished, click OK to return to the main window.
General Information
The “General Info” for the Combined Form consists of information you can enter to display in these
areas of the procedure:
• Emergency contact information, displayed at the bottom of the Front Page.
• Notes, displayed on the top of the first Back Page of the form.
• Procedure change information, displayed at the bottom of the last Back Page.
To add or modify the general information:
1. In the Procedure Sections panel, click General Info.
- or -
From the Main Menu, select Edit>General Info. The General Information window will display.
2. Emergency Contact Information: Enter or modify the information. This information will display in
a box at the bottom of the Front Page.
3. Notes: Enter or modify the information. This information will display in a box at the top of the first
Back Page.
4. Procedure Change Notification: Enter or modify the information. This information will display in a
box at the bottom of the last Back Page.
5. When done, click OK. The window will close and the procedure in the main window will be updated
with the information you added.
Note: Click Cancel if you don’t want to add the new or modified information to your
procedure. Your changes will be discarded.