User guide

LOCKOUT-PRO
TM
ENTERPRISE User Guide 5- 13
Energy Sources
In this section, you can define or revise each energy source to be locked out, and identify the methods
and devices for doing so. You can also rearrange the order of energy sources and delete energy
sources from the procedure.
To add energy sources to a Short Form procedure:
1. In the Procedure Sections panel, click Energy Sources.
- or -
From the Main Menu, select Edit>Energy Sources.
• If the Energy Sources window displays only the tab New Source and all fields are blank, go
to the next step.
• If the window displays
tabs for one or more energy sources , click Add Energy Source to
open a window without existing data.
Tip!
Before entering new information into a field, be sure to double-check that you are not
accidentally overwriting existing data or making unwanted changes to a procedure.
2. Energy Type: Choose the energy type by choosing the type from the drop-down list. After you
enter the location, an icon for that energy source will display below the name and text containing
its abbreviation will display in the Action field.
3. Description: Choose the energy source description by choosing the description you want from
the drop-down list. Or, type your own description into the box. The description will be added to the
energy source box.
Note: Some descriptions (such as volts and psi) display “xx” to remind you to enter a
specific number. When this occurs, click on the x, delete them, and type in the actual
number.
Tip!
The Lockout Process section lets you pull together and/or enter specific instructions
for the lockout step. You can type your own text into any of the text boxes and it will
display on the procedure. or you can use the built-in default text. Click the down-arrow
in each box to see the options. Click an option and the text will display in the text box
on this window and on the actual procedure.
If these default lists do NOT contain the text or terms you often use, can easily add
them. See Chapter 7: Setting Defaults for details.
4. Control/Method: Choose or type in the method to use to disconnect the energy source.
5. Device: Choose or type in the lockout device to use on the energy source.
6. Click Add Energy Source to add the next energy source, and repeat steps 2-5.
7. When finished, click OK. You will return to the main window, where the energy sources you added
will display on the procedure.
Note: Click Cancel if you don’t want to add the energy sources to your procedure. Your
changes will be discarded.