User guide

LOCKOUT-PRO

ENTERPRISE User Guide 5-

To rearrange lockout steps on a Long Form:

1. In the Procedure Sections panel, click the Lockout Steps.

- or -

From the Main Menu, select Edit>Lockout Steps. The Procedure Steps window will display, with

a tab displayed for each of the existing steps in the order they will be printed.

2. Click Arrange Procedure Steps.

3. When the Arrange Energy Sources window displays, click to select the step to move, then click the

Up or Down button to move it. Repeat the procedure until the steps are in the desired order.

Note: The original step number will remain on the list and the tab until you return to the

Procedure Steps window, where the steps will display in the new order.

4. When finished, click OK.

5. When you are finished with the Procedure Steps window, click OK. You will return to the main

window, where the changes you made will display on the procedure.

Note: Click Cancel if you don’t want to use the rearranged order of steps. Your changes

will be discarded.

To remove lockout steps from a Long Form:

1. In the Procedure Sections panel, click Lockout Steps.

- or -

From the Main Menu, select Edit>Lockout Steps. The Procedure Steps window displays, with a

tab for each of the existing steps.

2. Click the tab (Step #1, Step #2, etc.) for the step you want to remove.

3. When the step displays in the window, click Remove Procedure Step.

4. When prompted, click Yes if you want to delete the step, or No if you want to keep it.

Note: If you answer Yes, the step and all of its information will be deleted from the

procedure and the steps that follow it will be renumbered.

5. When finished with the Procedure Steps window, click OK. You will return to the main window,

where the changes you made will display on the procedure.

Note: Click Cancel if you want to restore the step(s) you deleted. Your changes will be

discarded.