User guide

LOCKOUT-PRO
TM
ENTERPRISE User Guide 5- 9
Lockout Steps
In the lockout step section, you can:
• Define each energy source to be locked out and describe the specific methods and devices for
doing so.
• Add or modify images that illustrate the lockout points or other equipment features relevant to
the procedure.
• Add lockout steps in any order, rearrange them, and delete them.
To add lockout steps to a Long Form procedure:
1. In the Procedure Sections panel, click Lockout Steps.
- or -
From the Main Menu, select Edit>Lockout Steps.
2. On the Procedure Steps window, take either of these actions:
• If the window displays only a Step #1 tab and no data displays in its fields, go to the next step.
• If the window displays
tabs for several steps and/or information displays in the fields for
Step #1 , click Add Procedure Step .
Tip!
Before entering new information into a field, be sure to double-check that you are not
accidentally overwriting existing data or making unwanted changes to a procedure.
3. Energy Type: Choose the energy type by choosing the type from the drop-down list. After you
enter the location, an icon for that energy source will display below the name and text containing
its abbreviation will display in the Action field.
4. Description: Choose the energy source description by choosing the description you want from
the drop-down list. Or, type your own description into the box. The description will be added to the
energy source box.
Note: Some descriptions (such as volts and psi) display “xx” to remind you to enter a
specific number. When this occurs, click on the x, delete them, and type in the actual
number.
Tip!
The Lockout Step section lets you pull together and/or enter specific instructions for
the lockout step. You can type your own text into any of the text boxes or you can use
the built-in default text. Click the down-arrow in each box to see the options. Click an
option and the text will display in the text box in the window and in the actual procedure.
If these default lists do NOT contain the text or terms you often use, you can easily add
them. See Setting & Changing Basic Data Defaults on page 7-8 for details.
5. Location: Choose or type the location of the energy source on the machine. The location is added
to the text in the Action box.
6. Control: Choose or type the method to use to disconnect the energy source for the step. The
control method is inserted into the text in the Action box.
7. Device: Choose or type the lockout device to use on the energy source for this step. The device
type is added to the Action box.