User guide

LOCKOUT-PRO
TM
ENTERPRISE User Guide 4- 9
2. In the Printer Information area, select a printer from the drop-down list. If a sheet-fed printer is
selected:
• Choose a Supply Material from the drop-down list.
• Enter an
X Offset and Y Offset value, if desired.
3. In the Location window, navigate to the location of the procedure file(s).
4. To add procedures to the print list:
a. In the Available procedures window, double-click to select a single file. To select multiple
sequential files, press and hold Shift while selecting files, or to select non-sequential files
press and hold Ctrl while selecting files.
b. Choose the number of copies you want printed for this procedure.
c. Click Add Procedure. The selected files display in the Print list window.
5. To add more procedures, repeat Steps 3-4.
Notes: • Once you click Print, the print order of the procedures cannot be changed.
• If you click Cancel, the application closes the batch print window, the batch list is
cleared and no procedures are printed.
6. Click Print. The application prints the number of copies specified for each procedure in the batch
list and updates the status for the print job as follows:
• Queued : Job is in the list or procedures to print
•
Sent : Job has been sent to the printer
•
Failed : Job could not be sent to the printer
•
Skipped : Job need additional configuration and the user chose to skip the file.
•
Empty : Job has been added to the list, but user did not click Print .
To remove procedures from a batch print list:
1. In the Print list window, highlight the selected procedure(s).
2. Click Remove Procedure. The application removes the selected procedure(s) and updates the
batch list.
Note: To clear the print list of all procedures, you can also click Remove All.
To change the procedure order in a batch list:
Note: Procedures are printed in the order they are listed in the batch list.
1. In the Batch Print window, highlight the procedure(s) you want to move.
2. To move the procedure(s) up or down in the print list, click the Up or Down button.
Note: Once you click Print, the print order of the procedures cannot be changed.