User guide
LOCKOUT-PRO
TM
ENTERPRISE User Guide 4-
5
Printing Lockout Tags
Note: You must be working online to print Lockout Tags.
To print lockout tags:
1. Open the procedure in the display area of the main window:
2. In the Primary Options taskbar, click Print Lockout Tags, or, from the Main Menu, select
File>Print Lockout Tags.
3. In the Print Lockout Tags window, verify that the printer you want to use is the one listed in the
Printer box. If not, click the down-arrow and select a different printer.
4. If you want to access and change any of your printer’s properties, click Properties.
Note: In the following steps, any changes that affect how the lockout tag will print are shown
in the Preview box.
5. With the correct printer displayed, make desired changes to the Supplies or Material options.
Depending on your printer:
•For
GLOBALMARK
®
printers:
- From the
Supplies
drop-down list, choose the
Tape Width
of the roll you are using.
•For
sheet-fed
printers:
- From the
Material
drop-down list, choose the type of tag sheet you are using.
- In the
Available Labels
section, uncheck boxes if you want to print fewer tags than the
sheet contains. (Default shows how many tags will print on a sheet, based on the paper
stock you chose.)
- In the
Offsets
section, enter a number to change the amount of horizontal (
X Offset
)
or vertical (
Y Offset
) space between paper edge and where the printing starts.
6. In the Lockout Information section:
•
Date Locked Out
and
Time Locked Out:
Use the up and down arrows to change to a
different date and/or time. Default displays the current date and time.
•
Lockout By
: Type the name of the person authorized to remove the lockout.
•
GLOBALMARK
®
printers only:
To add the Employee Picture of the person named in the
Lockout By
box, click the radio button next to the empty box, then click
Select
to locate and
insert the photo. Default is
None
.
•
Remarks:
Type in any additional information you want printed on the tags.
•
Expected Completion:
Enter the time when the re-energizing process should be finished.
•
Preview
: Review the lockout tag.
•
Zoom
: Use the zoom in/out controls to change the magnification.
•
Scroll
: Use the up/down arrow controls to scroll if the entire tag does not fit in the window.
Note: To discard all of your changes, click Reset. The window will refresh and display the
default information.
7. When you are ready to print, click Print.
Note: The Print Lockout Tags window remains open until you close it so you can check your
printed tags, make changes, or print more, without repeating the steps above.
8. When finished, click Close to return to the main window where your procedure is displayed.