User guide

4- 4 LOCKOUT-PRO
TM
ENTERPRISE User Guide
Printing Procedures
To print procedures:
1. Open the procedure in the display area of the main window.
2. In the Primary Options taskbar, click Print Procedure.
- or -
From the Main Menu, select File>Print.
3. Make any desired changes to the default options:
Note: The application updates the preview as necessary, mapping all items from the
original procedure to the corresponding template for the selected printer.
•Printer: Default = printer listed in the Printer box. Click the down-arrow to select a different
printer
• Properties : Click to change any of the printer’s properties.
•
Pages : Defaults = All . Or, you can enter one or a range of pages.
•
Copies: Default = 1. Choose the number of copies to print.
•
Offsets : Default = 0. Change the amount of horizontal ( X Offset ) or vertical ( Y Offset ) space
between the edge of the paper and where the printing starts (if using sheet-fed printer).
•
Supply : Change the paper supply type (if using a sheet-fed printer)
4. Review the pages in the Preview area. If desired:
• To change the magnification, use the Zoom In/Out controls.
• To scroll to other pages in the procedure, use the
Up/Down arrows.
5. When finished, click Print.
Note: To discard all changes you made and return to the original settings in the Print
Procedure window, click Reset.
6. To return to the main window, click Close.