User`s manual

Guide to Keys
Quick Start Guide
9
8
POWER – powers on the printer. Press the power button again to power off
the printer. The printer automatically shuts off after ten minutes of non-use.
FUNCTION – accesses a secondary function or character when pressed
along with the desired key. A secondary function or character is shown in
yellow on each button.
ARROW – adjusts cursor positioning by one character or one line.
FUNCTION + ARROW – adjusts cursor positioning to the first or last
character position or line.
ENTER – creates a new line when typing text.
Pressing ENTER confirms menu selection when in MENU mode.
DELETE – clears the character immediately behind the cursor position.
FUNCTION + – brings up two choices on the display:
Clear Text? – clears the text only.
Clear All? – clears all text and formatting, including font size.
When in MENU mode, the CLEAR/ESC function backs out of the menu.
This works whether or not you use it in conjunction with the FUNCTION
key.
PRINT – prints one copy of the legend.
FUNCTION + – prints up to 99 copies of the legend.
FONT SIZE – displays font size and allows font size changes through soft-
keys. See the Font Size Chart on page 10 of this guide. Also toggles bold
on and off.
MENU – toggles through softkey menu options and displays additional soft-
key choices.
FEED – feeds material through the printer without printing (for fixed length
continuous labels in order to advance the label strip to the cut position).
MEMORY – accesses Save, Recall, Delete softkeys used to store legends.
FUNCTION + – toggles between text and barcode mode.
SERIAL – performs a standard serialization of the character on which the
cursor is placed. A serialization results in a series of label data that is incre-
mented by one number (0-9) and/or one letter (A-Z, a-z).
FUNCTION + – accesses the symbol library.
See the Symbol Library on page 12 of this guide.
Guide to Keys
SPACE – creates a space between characters when creating legends.
FUNCTION + – toggles CAPS on and off.
FUNCTION + – brings up a selection of international characters.
Use either the softkey or keypad arrows to navigate the character menu.
FUNCTION + – navigates to the previous zone when entering text
and when viewing or editing previously entered text on continuous or
die-cut labels, in pre-defined zones. When using a zone that is not pre-
defined, this only functions for viewing or editing previously entered
text.
FUNCTION + – navigates to the next zone when entering text and
when viewing or editing previously entered text on continuous or die-
cut labels, in pre-defined zones. When using a zone that is not pre-
defined, this functions only for viewing or editing previously entered
text.
FUNCTION + – reserved for future use.
FUNCTION + then entering character(s) – enables the formatting
of entered character(s) to display and print as superscript.
FUNCTION + then entering character(s) – enables the formatting
of entered character(s) to display and print as sub-script.
FUNCTION + – enables insertion of the time by hour and minute
(the current time appears by default) or in 12/24 hour format.
Note: Pressing FUNCTION + the fourth softkey while in the TIME
menu toggles lock/unlock access for changing the time.
FUNCTION + – enables insertion of the date by day, month, and
year (current date appears by default). Note: Pressing FUNCTION +
the fourth softkey while in the DATE menu toggles lock/unlock access
for changing the date.