User`s manual

Display Screen
Quick Start Guide
5
4
When the Power button is pressed, the display screen appears.
The display allows you to see up to three lines
of text and 16 characters per line. The display
auto-scrolls when you enter more than the maxi-
mum displayed lines or characters. Use the
arrows on your keypad to navigate the screen.
Status Bar
The status bar, located on the bottom of the display, indicates the current text
line, font size, and label zone.
Menu
Use the menu and related softkeys to perform many of the label formatting
commands. See the Menu Tree on page 10 of this guide. To access the menu:
Step 1. Press .
When the Menu key is pressed, a series of menu choices appears. The blue soft-
keys correspond to the menu choices shown on the screen.
Softkeys
Step 2. Press NEXT to advance to the next set of menu choices.
Pressing NEXT again cycles back to the first set of menu choices when the last
menu choice is reached.
Step 3. Press to either back up to the previous menu level, or exit menu
mode and return to the text editor screen.
Follow these instructions to create and print a basic label. Refer to the
LABXPERT Laboratory Labeling System Sample Label Tutorial for step-by-
step instructions for creating more varieties of labels. In addition, for details and
information on advanced features, see the LABXPERT Laboratory Labeling
System User’s Manual.
TM
TM
Step 1. Press POWER.
Step 2. Press FONT SIZE.
The display screen shows
the current font size and bold status.
Note: See the Font Size Chart on
page 11 of this guide.
FONT: 10 pt
Bold: OFF
Step 3. Use the up/down arrow softkeys – or the arrows on your keypad –
to select a font size.
Step 4. Press the [BOLD] softkey to toggle bold ON or OFF.
Step 5. Press ENTER.
Step 6. Type text. Press ENTER after each line of text.
Note: You may also select from a list of symbols to include on your label.
See the Symbol Library on page 12 of this guide.
Step 7. Press PRINT.
Step 8. Pull the cutter lever down to cut the label.
For multiple copies,
press FUNCTION +
PRINT/MULTI-PRINT.
Understand the display screen and menu Create labels