User`s manual

Application Wizards
Wire Harness Labels
168
LabelMark 5.0 User’s Manual
Wire Harness Labels
Use the Wire Harness wizard to create labels specific for wire harness applications.
To use the Wire Harness wizard:
1. Click New .
2. On the Create New/Open dialog box, click Use a wizard to create labels.
3. Click Wire Harness Labels, then click OK.
4. There is only one Wire Harness label type. In the fields opposite the Wires component,
enter the number of label files to create for the Wire Harness.
You must indicate at least one wire harness type. You cannot leave the field at 0.
5. When ready, click Next.
6. On the Select file creation mode screen, click a component, then click the desired part
number from the specific list presented.
7. Repeat for each component listed.
8. When ready, click Next.