Specifications

173
DO-IT-YOURSELF LABELLING
bradyID.com.au |
Layout 1 Layout 2
THT: LABEL MATERIALS
PERMASLEEVE
™
WIRE MARKERS
PermaSleeve
™
markers fit snugly around wires for maximum insulation
protectionand permanent identification. Permasleeve
™
markers are available in
a 3-to-1 shrink ratio to cover a wider range of wire diameters per sleeve size.
BRADY PERMASLEEVE
™
shrink-to-fit insulating wire markers meet the rigid
insulating, material requirements and physical properties of MIL-DTL-23053/5
Class 1, MIL-M-81531, MIL-STD-202F, METHOD 215 and UL224. The
heat-shrinkable irradiated polyolefin does not smudge or fade when printed,
while theunique flattened full-circle design provides fast, permanent
wiremarking.
3-TO-1 SHRINK RATIO ONE-SIDED PRINTABLE
■ White Polyolefin (B-342)
Part No. Reference
Markers
Per Box
Range of Wire Diameter
Min. – Max (mm)
Marker Width
A (mm)
Marker Height
B (mm)
Vertical Repeat C
(mm)
Layout
Recommended
Ribbon Series
38.10 MM MARKER WIDTH
32612 PS-094-150-WT 2,500 0.58 – 2.03 38.10 4.60 12.70 1 R-4300
32136 PS-094-150-WT-S 500 0.58 – 2.03 38.10 4.60 12.70 1 R-4300
32613 PS-125-150-WT 2,500 1.17 – 2.79 38.10 6.00 12.70 1 R-4300
32137 PS-125-150-WT-S 500 1.17 – 2.79 38.10 6.00 12.70 1 R-4300
32614 PS-187-150-WT 2,500 1.57 – 3.81 38.10 8.50 15.88 1 R-4300
32138 PS-187-150-WT-S 500 1.57 – 3.81 38.10 8.50 15.88 1 R-4300
32615 PS-250-150-WT 2,500 2.39 – 5.46 38.10 11.15 19.05 1 R-4300
32139 PS-250-150-WT-S 500 2.39 – 5.46 38.10 11.15 19.05 1 R-4300
32616 PS-375-150-WT 1,000 3.18 – 8.13 38.10 16.40 25.40 1 R-4300
32140 PS-375-150-WT-S 250 3.18 – 8.13 38.10 16.40 25.40 1 R-4300
32617 PS-500-150-WT 500 4.75 – 11.43 38.10 21.60 31.75 1 R-4300
32141 PS-500-150-WT-S 250 4.75 – 11.43 38.10 21.60 31.75 1 R-4300
50.80 MM MARKER WIDTH
32600 PS-094-2-WT 2,500 0.58 – 2.03 50.80 4.60 12.70 1 R-4300
32142 PS-094-2-WT-S 500 0.58 – 2.03 50.80 4.60 12.70 1 R-4300
32601 PS-125-2-WT 2,500 1.17 – 2.79 50.80 6.00 12.70 1 R-4300
32143 PS-125-2-WT-S 500 1.17 – 2.79 50.80 6.00 12.70 1 R-4300
217054 PS-125-2-W-2S 1,000 1.17 – 2.79 50.80 6.00 12.70 2 R-4300
32602 PS-187-2-WT 2,500 1.57 – 3.81 50.80 8.50 15.88 1 R-4300
32144 PS-187-2-WT-S 500 1.57 – 3.81 50.80 8.50 15.88 1 R-4300
869669 PS-187-2-W-2S 1,000 1.57 – 3.81 50.80 8.50 15.80 2 R-4300
32603 PS-250-2-WT 2,500 2.39 – 5.46 50.80 11.15 19.05 1 R-4300
32145 PS-250-2-WT-S 500 2.39 – 5.46 50.80 11.15 19.05 1 R-4300
217058 PS-250-2-W-2S 1,000 2.39 – 5.46 50.80 11.15 19.05 2 R-4300
32604 PS-375-2-WT 1,000 3.18 – 8.13 50.80 16.40 25.40 1 R-4300
32146 PS-375-2-WT-S 250 3.18 – 8.13 50.80 16.40 25.40 1 R-4300
32605 PS-500-2-WT 500 4.75 – 11.43 50.80 21.60 31.75 1 R-4300
32147 PS-500-2-WT-S 250 4.75 – 11.43 50.80 21.60 31.75 1 R-4300
I
3-TO-1 SHRINK RATIO TWO-SIDED PRINTABLE
■ White Polyolefin (B-342)
Part No. Reference
Markers
Per Box
Range of Wire Diameter
Min. – Max (mm)
Marker Width
A (mm)
Marker Height
B (mm)
Vertical Repeat
C (mm)
Recommended
Ribbon Series
50.80 MM MARKER WIDTH
32510 3PS-094-2-WT 2,500 0.58 – 2.03 50.80 4.60 12.70 R-4300
32148 3PS-094-2-WT-S 500 0.58 – 2.03 50.80 4.60 12.70 R-4300
32507 3PS-125-2-WT 2,500 1.17 – 2.79 50.80 6.00 12.70 R-4300
32149 3PS-125-2-WT-S 500 1.17 – 2.79 50.80 6.00 12.70 R-4300
32511 3PS-187-2-WT 2,500 1.57 – 3.81 50.80 8.50 16.00 R-4300
32150 3PS-187-2-WT-S 500 1.57 – 3.81 50.80 8.50 16.00 R-4300
32508 3PS-250-2-WT 2,500 2.39 – 5.46 50.80 11.15 19.05 R-4300
32151 3PS-250-2-WT-S 500 2.39 – 5.46 50.80 11.15 19.05 R-4300
32512 3PS-375-2-WT 1,000 3.18 – 8.13 50.80 16.40 25.40 R-4300
32152 3PS-375-2-WT-S 250 3.18 – 8.13 50.80 16.40 25.40 R-4300
32509 3PS-500-2-WT 500 4.75 – 11.43 50.80 21.60 31.75 R-4300
32153 3PS-500-2-WT-S 250 4.75 – 11.43 50.80 21.60 31.75 R-4300
Note: Sleeves may be perforated at factory for shorter marker lengths. Depending on overall length, sleeves may be perforated in halves, thirds or quarters.
Contact your Brady Distributor or Customer Service Representative for ordering information.
I
Refer to the material guide on page 361-369 for
full material specifications and descriptions.