Specifications

169
DO-IT-YOURSELF LABELLING
bradyID.com.au |
THT: LABEL MATERIALS - DURASLEEVE
®
WIRE MARKING SYSTEM
PART NUMBER AND REFERENCE NUMBER EXPLANATION
Durasleeve
®
wire marking carriers follow a three-part format similar to the standard
reference numbers throughout the catalogue. The first part (DMC) indicates it is a
Durasleeve
®
wire marking carrier. The second part denotes the minimum to maximum
wire diameter the carrier will accomodate (e.g. 1.3/3 = 1.3mm up to 3mm). The final part
indicates the size of Durasleeve
®
insert suitable for this carrier - either 15mm or 30mm.
DMC-1.3/3 - 15
FOR CLEAN, EASILY READABLE AND DURABLE WIRE MARKERS
Durasleeve
®
markers create a durable legend. This solution consists of two components: a transparent tube (carrier) with a
label pocket and an insert to slide into this pocket. Your legend is protected at all times by the tube and can easily be replaced.
Printingthe inserts on a Brady system ensures clean crisp readable legends every time.
DURASLEEVE
®
INSERTS
■ DURASLEEVE
®
Inserts (B-390)
Part No. Reference
Insert Dimensions Max
Lines
of Print
Max.Char. Across
Recommended
THT Ribbon
Series
Recommended
BBP11
Ribbon
Inserts
Per Roll
Inch (mm)
A
Inch(mm)
B
7 8 9
15 MM INSERT WIDTH
843381 DSTHT-15-390-2.5 2,500 0.59 (15) 0.16 (4) 1 8 7 6 R-6200 R-7950
853729 DSTHT-15-390-2.5-YL 2,500 0.59 (15) 0.16 (4) 1 8 7 6 R-6200 R-7950
30 MM INSERT WIDTH
843382 DSTHT-30-390-2.5 2,500 1.18 (30) 0.16 (4) 1 16 14 12 R-6200 R-7950
853730 DSTHT-30-390-2.5-YL 2,500 1.18 (30) 0.16 (4) 1 16 14 12 R-6200 R-7950
DURASLEEVE
®
CARRIERS
Part No. Reference
Carrier Length
(mm)
Wire O.D.
(mm)
Carriers
per Box
13255 DMC-1.3/3-15 15.00 1.30 – 3.00 1,000
13262 DMC-1.3/3-30 30.00 1.30 – 3.00 500
13256 DMC-2.5/5-15 15.00 2.50 – 5.00 1,000
13263 DMC-2.5/5-30 30.00 2.50 – 5.00 500
13258 DMC-4/10-15 15.00 4.00 – 10.00 500
13265 DMC-4/10-30 30.00 4.00 – 10.00 200
13259 DMC-8/16-15 15.00 8.00 – 16.00 500
13266 DMC-8/16-30 30.00 8.00 – 16.00 200
I
I
B
A
Refer to the material guide on page 361-369 for
full material specifications and descriptions.