Specifications

145
DO-IT-YOURSELF LABELLING
bradyID.com.au |
Laminat
™
is an extreme durability, the highly versatile carrier for cable identification. Laminat
™
comes with a strip to laminate text
labels. The carrier is to be fixed with two cable ties directly on the cables and wires. This dependable marking system enables you
to permanently mark cables and wires. The Laminat
™
Carriers can be used for any type of cable identification where permanency
of the legend is crucial. Follow these steps to mount the label onto the Laminat
™
Carrier:
1. Pull the protective foil
backwards
2. Place the label in the
middle leaving space for
sealing on all four sides
of the label.
3. Seal the carrier by placing
a finger on the foil and
pushing forward, thus
rolling over the foil and
rolling off the silicon liner.
4. Always feed the cable
ties from the top, thus
bending down the
Laminat
™
Carrier along
the cable.
BMP
™
71 PRINTER LABEL MATERIALS
When you are looking for cable markers with extreme durability, the Laminat range of carriers and tags is the solution. The range
consists of two parts: Laminat
™
Carriers (B-7644) and Laminat
™
Tags (B-7645).
LAMINAT
™
CARRIERS
■ Rigid Polypropylene Tag (B-7644)
Part No. Reference
Markers
per box
Colour
Dimensions Width Height Seal-Up Area Recommended
LabelA (mm) B (mm) C (mm) D (mm)
620316 LC-65x13-B7644 100 Yellow 65.00 13.00 45.00 9.00 M71-45-430
620317 LC-71x9-B7644 100 Yellow 71.00 9.00 45.00 9.00 M71-45-430
620318 LC-103x15-B7644 100 Yellow 103.00 15.00 55.00 15.00 PTLTL-6-430*
620319 LC-128x15-B7644 100 Yellow 128.00 15.00 80.00 15.00 PTLTL-1-430*
620320 LC-178x15-B7644 50 Yellow 178.00 15.00 130.00 15.00 PTLTL-2-430*
* This is a TLS2200
™
printer label. In order to use these labels with the BMP
™
71 Printer, please use the yellow adaptor supplied with your printer.
Please note some of the automatic material recognition functionality on the BMP
™
71 will not be available when using these TLS2200
™
parts.
I
LAMINAT
™
TAGS - CABLE MARKERS
■ Rigid Polypropylene Tag (B-7645)
The Laminat
™
Tags are ideal for identification of material in tough environments including
valves, instruments, motors and other industrial components. The tags are available in two
versions: with and without stainless steel reinforcement rings.
Part No. Reference
Markers
per box
Material Colour
Dimensions
Width
Height Seal-Up Area
Recommended
Label
A (mm) B (mm) C (mm) D (mm)
620321 LT-59x25-B7645 50 Yellow 59.00 25.00 43.00 25.00 PTLTL - 4 - 430*
620322 LT-59x25-B7645-WR 50 Reinforced Yellow 59.00 25.00 43.00 25.00 PTLTL - 4 - 430*
620323 LT-150x25-B7645 50 Yellow 150.00 25.00 135.00 25.00 PTLTL - 3 - 430*
620324 LT-150x25-B7645-WR 50 Reinforced Yellow 150.00 25.00 135.00 25.00 PTLTL - 3 - 430*
* This is a TLS2200
™
printer label. In order to use these labels with the BMP
™
71 Printer, please use the yellow adaptor supplied with your printer.
Please note some of the automatic material recognition functionality on the BMP
™
71 will not be available when using these TLS2200
™
parts.
I
LABELS FOR LAMINAT
™
CARRIERS AND TAGS
■ Clear Polyester (B-430)
Labels specifically design to fit the Laminat
™
carriers and tags.
Part No. Reference Labels per roll
Dimensions Width Height Continuous
Roll Length (m)
Recommended
Ribbon Series
A (mm) B (mm)
114991 M71-68-430 750 6.00 3.81 R-6000
114992 M71-71-430 750 8.89 5.08 R-6000
115135 M71C-375-430 Continuous 9.53 15.24 R-6000
104294 M71C-500-430 Continuous 12.70 15.24 R-6000
114739 M71-16-430 500 25.40 9.53 R-6000
114747 M71-17-430 500 25.40 12.70 R-6000
114708 M71C-1000-430 Continuous 25.40 15.24 R-6000
114834 M71-45-430 500 38.10 9.53 R-6000
114754 M71C-1900-430 Continuous 48.26 15.24 R-6000
I