Quick Start Guide

Quick Start Guide
2
Safety
■ The label printer is configured for voltages of 100 to 240 V ~ (50 to 60 Hz).
Connect only to a grounded power outlet.
■ The label printer may only be used in a dry environment, do not expose it to
moisture (water, mists, etc.).
■ If the label printer is operated with the cover open, ensure that people’s
clothing, hair, jewelry etc. do not come into contact with the exposed
rotating parts.
■ During the print process, the print assembly can become hot. Do not touch
the print assembly during operation, and allow the assembly to cool down
before changing material and before disassembly.
■ Perform only those actions described in this quick operator’s guide. Work
going beyond this may only be performed by trained personnel or service
technicians.
A WARNING
Entanglement Hazard
• MOVING PARTS can entangle.
• AVOID wearing jewelry or loose fitting clothing.
• ALWAYS tie back long hair.
A DANGER
Electric Shock Hazard
• DO NOT open the label printer casing.
• UNPLUG power cord before servicing.
• CONTACTING power supply can cause
electrocution.