Quick Start Guide

Quick Start Guide
8
Figure 4, Loading the Ribbon
3. Pull the front cover (Figure 4, 1) toward you and lift the ribbon carrier into
the loading position (Figure 4, 4).
4. Position the square end of the new ribbon spindle in the square notch on
the right side of the printer, push the spindle slightly to the right and slide
the other end of the spindle into the notch (Figure 4, 2) on the left side of
the printer.
5. Bring the ribbon end forward and over the thermal printhead (Figure 4, 3)
to the ribbon take-up spindle (Figure 5).
2
1
4
5
3