Brochure
46
Master material index
Brady Material No. Material Finish Colour Temp (°C)
(Tested for 30 days)
Performance
Attributes
Properties & Applications Approval/Compliance
Min. Max.
B-549 Polyester Gloss White -40 °C 100 °C
Flexible, dimensionally stable, low temperature,
pressure sensitive adhesive tape for permanent
application. Adhesive can be applied at tempera-
tures down to -10°F (-23°C).
–
B-551 Polyester Tag White -40 °C 89 °C
Tag material used for marking on-the-spot warning
of dangerous conditions
Complies to OSHA 1910.145(f)
when printed with required signal
word and major message.
B-565 Metallised Polyester Matt Silver -40 °C 110 °C
Designed for applications like identification labels
or rating and serial plates that utilise barcodes,
alphanumerics, graphic symbols and logos and
require nameplate-like quality
–
B-569 Polyester Green -40 °C 100 °C
Designed for use on stainless steel pipes in harsh
environments such as the Pulp and Paper Industry
–
B-581 Vinyl Gloss White -40 °C 82 °C
Only indoor use, where frequent repositioning is
required
–
B-584 Reflective Tape Gloss Orange -40 °C 70 °C
Suitable for outdoor use. Also available in silver
and yellow.
–
B-593 Polyester Gloss White -20 °C 100 °C
EPREP (Engraved Panel REPlacement labels) are
designed for patch panel identification in identify-
ing external push-buttons, switches and internal
connection points. Also available in black, green,
red, silver and yellow.
UL Recognised; cUL Recognised
B-595 Vinyl Gloss White -40 °C 82 °C
Durable, low-shrink vinyl with our most aggressive
adhesive. Conforms to irregular, curved, rough and
highly textured surfaces (painted cinder blocks,
uneven wood, textured plastics, paper-jacketed
pipes, powder-coated surfaces). Adheres to “dif-
ficult” low-surface energy items (PVC piping, blow-
moulded equipment cases, ABS plastics, recycled
plastics). Available in a wide range of colours.
BS5609:1986 Section 2 and
section 3
B-717 Polyimide Gloss White -70 °C 300 °C
White polyimide material with glossy finish and
ultra-durable adhesive. Used in printed circuit
board and electronic component pre-process label-
ling. Designed for use with extreme wash protocol
and cleaning chemicals. Surface resistivity values
in the recommended range for dissipative ESD
packing materials.
UL Recognised; Meets the
requirements ofANSI/ESD
S541-2008(between 10
4
and
10
11
ohms) for dissipative ESD
packaging materials; Meets the
performance requirements ofMIL-
STD-202G, Method 215K
B-718 Polyimide Gloss White -70 °C 300 °C
White polyimide material, low profile (1 mil
thickness), with glossy finish and ultra-durable ad-
hesive. Used in printed circuit board and electronic
component pre-process labelling. Designed for use
with extreme wash protocol and cleaning chemi-
cals. Surface resistivity values in the recommended
range for dissipative ESD packing materials.
UL Recognised; Meets the
requirements ofANSI/ESD
S541-2008(between 10
4
and
10
11
ohms) for dissipative ESD
packaging materials; Meets the
performance requirements ofMIL-
STD-202G, Method 215K
B-719 Polyimide Matt White -70 °C 300 °C
White polyimide material with matt finish and ultra-
durable adhesive. Used in printed circuit board
and electronic component pre-process labelling.
Designed for use with extreme wash protocol and
cleaning chemicals. Surface resistivity values
in the recommended range for dissipative ESD
packing materials.
UL Recognised; Meets the
requirements ofANSI/ESD
S541-2008(between 10
4
and
10
11
ohms) for dissipative ESD
packaging materials; Meets the
performance requirements ofMIL-
STD-202G, Method 215K
B-724 Polyimide Matt Amber -70 °C 300 °C
Amber polyimide material with matt finish and
ultra-durable adhesive. Used in printed circuit
board and electronic component pre-process label-
ling. Designed for use with extreme wash protocol
and cleaning chemicals.
Meets the performance require-
ments of MIL -STD-202G, Notice
12, Method 215K; Meets the
requirments of SAE AS81531
Marking of Electrical Insulating
Material
B-727 Polyimide Gloss White -70 °C 300 °C
White polyimide material with glossy finish and
ultra-durable adhesive. Used in printed circuit
board and electronic component pre-process label-
ling. Designed for use with extreme wash protocol
and cleaning chemicals.
UL Recognised; Meets the perfor-
mance requirements of MIL -STD-
202G, Notice 12, Method 215K;
Dibutyltin and Dioctyltin free.
B-7425 Polypropylene Matt
Black on
White
-80 °C 70 °C
White Polypropylene material. Ideal for laboratory
identification such as vials, centrifuge tubes and
test tubes. For freezer or liquid nitrogen applica-
tions, B-7425 must be applied prior to being
frozen.
–
B-7563 Metallised Polyester Satin Silver -40 °C 135 °C
Thermal transfer printable metallised polyester
withstands numerous solvents and variable
temperatures. Ideal for serial and rating plate
applications with name-plate quality and a metal
looking finish.
UL Recognised
B-7569 Vinyl Gloss White -20 °C 75 °C
Used for Pipe Markers, Arrow Tape, Warehouse
Marking, Floor Marking, Warning Panels, Safety
Signs and Hazardous Substance Identification.
Available in a wide range of colours.
BS5609:1986 Section 2 and
section 3