Brochure

www.bradyeurope.com
45
Master material index
Brady Material No. Material Finish Colour Temp (°C)
(Tested for 30 days)
Performance
Attributes
Properties & Applications Approval/Compliance
Min. Max.
B-435 Metallised Polyester Gloss Silver -40 °C 90 °C
Printable metallised polyester withstands numer-
ous solvents and variable temperatures. Ideal for
serial and rating plate applications with name-plate
quality and a metal looking finish.
UL Recognised; CSA Accepted
B-437 Polyvinylfluoride Matt White -70 °C 135 °C
Polyvinylfluoride label material with matt finish.
Used in wire and cable identification applications
where self-extinguishing features are required. This
label material utilises an adhesive for heavy-duty
applications and is available in continuous or die-
cut formats. Excellent resistance to water, oil and
other common fluids. Also available in yellow.
MIL-M-87958 Pressure Sensitive
Adhesive Wire or Cable Marker
and Identification specification
B-438
Tamper-evident
Metallised Polyester
Matt Silver -40 °C 40 °C
Metallised polyester material with matt finish.
Leaves a checkerboard footprint on the surface
when removed; the pattern also appears on the top
of the label to prevent it from being reused.
UL Recognised
B-461
Self-laminating
Polyester
Matt
White/
Transparent
-196 °C 110 °C
Permanent adhesive; suitable for liquid nitrogen
application if material is wrapped around itself,
as in self-lamination; write-on capabilities. Tem-
perature range increases to 121°C when used in
autoclave process
–
B-472 Polyimide Matt White -70 °C 100 °C
Cable and wire bundle applications and label
applications where self-extinguishing properties
are required
–
B-480A
Metallic, Non-metal
Polyester
Satin Silver -70 °C 110 °C UL Recognised; cUL Recognised
B-481
StainerBondz™
Polyester
Matt White -80 °C 130 °C
White polyester will remain resistant when exposed
to xylene and other chemicals that are commonly
used in the slide staining process
–
B-482 Polyester Matt White
The B-482 label material, combined with Brady’s
R6400 ribbon, provides the durability and print
quality that histology and anatomic pathology labs
need for accurate, identifiable specimen labelling.
Paraffin and solvent resistant.
–
B-483 Polyester Gloss White -40 °C 120 °C
White polyester thermal transfer printable material
with glossy finish and aggressive adhesive specifi-
cally designed for powder coated surfaces.
UL Recognised; CSA Accepted
B-484A Polyester Gloss White -40 °C 120 °C
White polyester thermal transfer printable material,
similar to B-483, but with thinner construction
for curved or angled surfaces. Offers aggressive
adhesive for adhesion to textured metals and low
surface energy plastics.
UL Recognised
B-486B Metallised Polyester Matt Silver -40 °C 120 °C
Thermal transfer printable metallised polyester
material. Designed for high adhesion to textured
metals, powder coated surfaces and low surface
energy plastics.
UL Recognised; CSA Accepted
B-488 Polyester Matt White -40 °C 145 °C
White polyester thermal transfer printable material,
similar to B-423, but with matt finish. Widely used
for component identification, barcoding, asset and
inventory tracking.
UL Recognised; CSA Accepted
B-489A Polyester Matt White -40 °C 120 °C UL Recognised; CSA Accepted
B-490
Freezerbondz™
Polyester
Matt White -196 °C 130 °C
Can be applied to frozen surfaces including glass
and polypropylene stored in liquid nitrogen, except
for Vial Tops. Material must slightly overlap itself.
–
B-492
Freezerbondz™
Polyester
Matt White -196 °C 110 °C
Ultra thin; can label frosted/frozen (with overlap)
or room temperature labels and lasts in liquid
nitrogen and hot water baths
–
B-498 Vinyl Cloth
Semi-
gloss
White -40 °C 80 °C
White vinyl cloth label material with glossy finish.
The adhesive and cloth backing give excellent
holding power, while being repositionable and
removing cleanly.
UL Recognised
B-499 Nylon Cloth Matt White -40 °C 90 °C
Nylon cloth material with matt finish. The adhesive
allows labelling in environments with heat, cold, oil
and dirt. Also available in yellow.
UL Recognised; CSA Accepted;
Halogen Free (DIN VDE 0472/
part 815) Approvals are for White
material only
B-509 Magnetic Polyester White -18 °C 70 °C
Magnetic Back Polyester is used for temporary,
reusable and movable signs
–
B-526
Phosphorescent
Polyester
Gloss
Luminous
Green
-40 °C 60 °C
BradyGlo™ High Intensity laminate is designed to
provide high adhesion and luminance for egress
marking in low light areas in and along stairwells
of public buildings, exit and directional signs,
identification of fire alarms and extinguishers, low
location egress pathway markings, and directional
systems for escape or evacuation routes.
New York Local Law 26 RS
6-1 & 6-1A; City of New York,
Department of Buildings MEA No.
467-06-M UV: 46-9-7