Brady Worldwide Identification Solutions 6555 West Good Hope Road P.O. Box 2131 Milwaukee, WI 53201-2131 Phone: (800) 537-8791 Fax: (800) 292-2289 www.bradyid.
CONTENTS 2 7 NOTE: Drawing not to scale – for reference only.
SET-UP INSTRUCTIONS ADJUSTMENTS Place the label roll onto the reel hanger bar. The roll should be against a metal lock clip so that it is held straight. Place second metal lock clip onto reel hanger bar to keep the labels snug. Hold Down Brush: Thread the web under the guide rod, between the hold down brush and the strip plate and back under the strip plate. Lay the web across the slot in the take-up hub. Lock the web in position with the metal lock rod. (The take-up hub turns counter-clockwise.
FEATURES MAINTENANCE • Turn machine off when not in use. • Remove liner material from take-up hub when it reaches approximately 2" in diameter or if the motor appears to be straining. • Do not operate machine without covers in place. • Do not operate if inspection reveals a damaged power or sensor cord. • Keep strip plate, hold down brush and hub free of adhesive build-up.
