User guide
LabelMark 3 User Guide
18 LabelMark Overview
• Label tab options (set the default part, part list, etc.):
To select a default part number (the suggested part when you create a new label file):
Click Deselect label to clear the previous default part number.
Select your desired Printer type and Part family.
Select Favorite from the Part list box if you want to default to your favorite list when
creating a new file.
Enter a default terminal block repeat value in the Repeat box. Refer to Setting Continuous
Label and Terminal Block for information on terminal block repeat values.
Click the desired Part name from the list if you want to designate a default part.
• Format tab options (the initial settings when you add text):
Note: These changes take effect for new label files, not for existing files.
Select your desired default text font, size and style.
Set Line Spacing for text editing. Numbers > 100 increase line spacing and < 100 reduce line
spacing.
Set the Expand/Condense width for text editing. Numbers > 100 expand text width and < 100
condense text width.
Set Horizontal and Vertical alignment for text editing.
Set your desired location for Positioning of text objects for LabelMark Plus editing. Default
places the cursor based on the selected horizontal and vertical alignment, but you can move
the cursor anywhere on the label. Manual requires you to place the cursor.
When you are finished setting defaults, click OK. Settings are applied immediately and will remain until
changed.