Operator`s manual

87
Media and Ribbon
Media Types: Roll-Fed, Die-Cut, Continuous, Fan-Fold. Flat on
the printable side with no more than .0007"
(.018mm) protrusions on the opposite side.
Maximum Media Width: 4.65" (118.1 mm)
Minimum Media Width: 1" (25.4 mm)
Media Thickness: .0025" - .01" (.06 mm – .25 mm)
Media Roll Capacity*: 8" (203.2 mm) Outer Diameter
Media Core: 1.5" or 3.0" (38 mm – 76.2 mm) Inner diameter
Ribbon Core:
1.010 ± .006" (25.65 ± .15 mm) Inner diameter
size. Core not to protrude beyond ribbon edge.
Ribbon Width Range**: 1.0 – 4.5" (25.4 – 114.3 mm)
Ribbon Length**: 1968 Feet (600 Meters) Maximum
*Labels wound out only.
**Coated side in or out depending upon the Ribbon Supply Hub in the printer; the ribbon
width to slightly exceed label width (including backing material).
E
A
B
C
D
G
H
I
J
F
Designator Description
Max.* Min.*
A Label width: 4.65 1.00
B Backing width: 4.65 1.00
C Gap between labels .250 .100
D Label length 99.99 .250
E Media thickness .0100 .0025
F Width of sensor opening .500 .200
G Distance from the media edge to the Media
Sensor opening edge (left justified)
2.250 .200
H Reflective sensor mark width** 4.65 .500
I Distance between reflective mark 99.99 .500
J Reflective sensor mark length .250 .100
*Units of measure are in inches.
**The reflective sensor black mark must be carbon based and placed on the backside of
the stock. The reflectance of the mark shall be less than 10% at wavelengths of 950
and 640 nm.