Operator`s manual

40
4.1.6 Diagnostics
HEX DUMP MODE
Mode most commonly used to troubleshoot
communications and format related
problems. See Section 6.3 for details.
ENABLE
Prints raw ASCII data received from the
host rather than executing the commands.
DISABLE
Executes and prints label formats (normal
operating mode).
OPTIONS TESTING
Tests currently installed options
TEST PRESENT
SENSOR
Performs a functional test of the Present
Sensor circuitry.
TEST CUTTER
Performs a functional test of the optional
cutter mechanism and circuitry.
PERFORM TEST
Selectable number of test cuts: 1, 10, or 100
times.
TEST INPUT/OUTPUT
Tests the optional GPIO (General Purpose
Input / Output) port when installed.
MONITOR GPIO INPUT
TEST GPIO OUTPUT
DOT CHECK TEST
Tests the individual printhead dots
(elements).
PERFORM DOT
CHECK
Updates the dot check results by performing
the dot check test.
DOT CHECK RESULTS
Displays the current results of the dot check
test.
XXXX OF YYYY
TESTED GOOD
Displays the ratio of dots tested which
passed.
INSPECT BAD DOTS
Allows the user to view the individual
resistances of the dots that failed.
XXXX OF YYYY
ZZZZ OHMS
Press the forward and reverse keys to scroll
through detailed results. The position of the
dot is displayed on the top line. The
resistance value is given on the second line.
(Continued next page)