Operator`s manual

35
System Settings (continued)
CONFIGURATION LEVEL
Note: Reserved for future use – current
printer configuration does not allow these
values to be modified. This information
may change at a later date.
To upgrade the application (resident
software) of the printer, the hardware and
software compatibility levels must match for
the update to be accepted. This information
is displayed here and can also be found
printed on the configuration label.
Each printer has a unique KEY number in
the following form:
vvvv-wwxx-yyyyyy-zzz
where:
vvv
v
– represents the model number of
the application loaded
wwx
x
– represents the configuration level
ww represents the main board
hardware compatibility
level
xx represents the software
compatibility level (see
below)
yyyyy
y
– is a manufacturing date code
PRINTER KEY
zz
z
– is a unique time stamp
UPGRADE PRINTER
CODE
The application version may only be
updated with a configuration level of equal
or lesser value than the software level;
however, the printer’s software
compatibility level can be increased by
purchasing and entering the proper
upgrade code here.
(Continued next page)