Operator`s manual

34
4.1.4 System Settings
MEMORY SETTINGS
♦
Allows user to allocate use of printer
memory.
INTERNAL MODULE
1024 KB
(100-16384)
Sets the number of 1K blocks allocated for
the internal RAM ‘D’ module. Available
memory dependent upon model; see
Appendix C.
SCALEABLE FONT
CACHE
0312 KB
(100-16384)
Sets the number of 1K blocks allocated for
the scaleable font engine. Available memory
dependent upon model; see Appendix C.
SYMBOL SET SELECT
Selects the code page used by the printer
unless otherwise specified in DPL.
PC_850
MULTILINGUAL
29 selections are standard, see the
Programmer’s Manual for details.
DATE AND TIME
Allows the user to set Date/Time.
MEDIA COUNTERS
Internal record of inches printed and time
in use.
ABSOLUTE
COUNTER
Shows the number of inches printed and
number of hours of the printer has been
powered ‘On’ since being set at the factory.
Not resettable by the user.
RESETTABLE
COUNTER
The number of operational hours and
inches printed from the date last reset.
User may reset.
RESET COUNTER
Resets the resettable counters to zero.
PRINT CONFIGURATION
Prints the effective configuration of the
system. In addition, if settings were changed
that require a reset to become effective, this
will be indicated with the ‘§’ symbol.
A ‘•’ symbol next to the printed item
indicates that it was changed via the host
but not saved in non-volatile memory
(Continued next page)