Operator`s manual

4.0.6 Factory Default Resetting

Depending upon the method used, there are two factory default reset levels

possible:

Note: See Section 4.1 for the factory default settings.

Level 1: To return the printer to factory default settings only: press and hold the

PAUSE and CANCEL keys; continue to depress the keys until the

‘SYSTEM RESET’ message flashes.

Level 2: Highest level; will return the printer to factory default settings, and

will reset all calibration and adjustment parameters, to execute: press

and hold the PAUSE, FEED, and CANCEL keys; continue to depress

the keys until the ‘SYSTEM RESET’ message flashes.

Note: After performing a Level 2 Reset, the printer requires that

both Ribbon and Media Calibrations be performed; see

Sections 5.2 and 5.3.