Operator`s manual

25
4.0 Front Panel Operation
The front panel is equipped with five keys, 3 indicators and a Liquid Crystal
Display (LCD). The key functions differ depending upon the selected mode. The
selectable modes are Ready, Menu and Quick Test.
4.0.1 Ready Mode:
Normal Operation (Ready Light ‘On’)
Pressing the PAUSE key temporarily suspends
printing. Pressing again returns the printer to
normal operation.
The FEED key advances one label, and clears any
faults that have been corrected.
Pressing and holding this key 4 seconds will
calibrate the label position.
The CANCEL key cancels a job and ‘Pauses’ the
printer.
Pressing and holding this key 4 seconds will reset
the printer and clear temporary host settings.
The MENU key toggles between the Ready and
Menu Modes.
In the Ready mode, pressing and holding 4 seconds
will change the display contrast.
Pressing the TEST key enters the Quick Test Menu.