Operator`s manual

4
LAN Interface
A slide-in circuit card assembly that provides network connectivity, allowing
multiple users on various platforms to share the same printer.
Peel and Present Mechanism
(requires the Internal Rewind option)
A device used to automatically separate printed labels from the backing material
on-demand.
Present Sensor
A device to control the printer’s output, where subsequent printing occurs only
after the removal of a previously print label.
RS-422 Serial Interface*
Single-drop interface hardware to support greater distances from the host at
communication rates of up to 38,400 baud.
Thermal Transfer
This method uses ribbon to produce exceptional image clarity, as compared to
most direct thermal media types. This option can be ordered for use with either
‘coating in’ or ‘coating out’ type ribbons, and must be specified when ordering.
Twinax/Coax Interface
A slide-in circuit card assembly that provides connectivity to AS/400 and
System/3X Twinax host system or 3270-type host system. Cable included.
*These items are not available for the 2461 model printer.