BMP71 Material information
BMP71 – Material information Material per application. Page 1/5 Application Polyester Polyester Polyester Polyester B422 B423 B428 B430 Material nummer: Appearance: White, Glossy White, Glossy Metallized, Matte Transp., Glossy Product ID Product ID Main applikation: Strong adhesive Product ID Flat surface X Rough, texturized surface X Polyester Polyester Polyester B459 B461 B473 White, Matte Product ID White/Transp.
BMP71 – Material information Material per application. Page 2/5 Application Polyester B483 Material nummer: Appearance: White, Glossy Main applikation: Strong adhesive Polyester Polyester Polyester Polyester* Vinyl Vinyl B486 B488 B489 B7593 B351 B352 Met., Matte Strong adh. White, Matte Chemicals White, Matte Colours, Glossy White, Matte Rough surfaces Engraved Plate Tamper evident Replacement Flat surface X X X X X Rough, texturized surface X X X X X X X X X X Met.
BMP71 – Material information Material per application.
BMP71 – Material information Material per application. Page 4/5 Application Material nummer: Appearance: Main applikation: Polyethylene Polyethylene Polyethylene B109 White, Matte Tag mtrl B145 Grey, Matte Tag mtrl Polyimide Polyimide Polyimide Polyimide B7599 B426 B457 B477 B478 Yellow, Glossy Tag mtrl Amber, Matte High temp. White, Glossy High temp. X X X X X X X X M71-R4300 M71-R6000 M71-R6000 M71-R6000 Flat surface White, Glossy White, Glossy High temp /ESD High temp.
BMP71 – Material information Material per application. Page 5/5 Application Material nummer: Appearance: Main applikation: Flat surface Paper B424 White, Matte General ID Polypropylene Polypropylene Polypropylene B412 White, Glossy No adhesive Polyolefin Polyester Polyolefin B425 B529 B7643 B582 B584 White, Matte Wire-ID Yellow, Matte Tag material Yellow, Matte Tag material Glossy Photolum.
BMP71 – Material information – Polyester Available materials Back • Polyester B422 White, glossy material Very agressive, permanent adhesive Temperature range from -40ºC to +100ºC Good resistance to solvents and chemicals For use on all flat surfaces, especially where extra good adhersion is needed (rough, textured...
BMP71 – Material information – Polyester Available materials Back • Polyester B423 White, glossy material Permanent acrylic adhesive Temperature range from -40ºC to +120ºC Good resistance to solvents and chemicals For use on all smooth, flat surfaces Not for highly curved surfaces due to rigidness – Halogene free – – – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester Available materials Back • Polyester B428 Metallized, matte material Permanent acrylic adhesive Temperature range from -40ºC to +120ºC Good resistance to solvents and chemicals – For use on all smooth, flat surfaces – Not for highly curved surfaces due to rigidness – Halogene-free – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester Available materials Back • Polyester B430 – – – – – – Transparent, glossy material Permanent acrylic adhesive Temperature range from -70ºC to +100ºC Good resistance to solvents and chemicals For use on smooth, flat surfaces Not for highly curved surfaces due to rigidness Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester Available materials Back • Polyester B459 White, matte material Permanent acrylic adhesive Temperature range from -40ºC to +110ºC Good resistance to solvents and chemicals – For use on smooth, flat surfaces – Not for highly curved corners due to rigidness – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester Available materials Back • Polyester B461 (laboratory applications) – White/Transparent, matte, ultra thin mtrl – Print on the coloured part, wrap around the cable → the text is overlaminated – Permanent acrylic adhesive – Temperature range from -196ºC to +130ºC after overlamination – Very good resistance to solvents and chemicals – For use on curved surfaces, mainly within the laboratory market – Halogen-Free Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester Available materials Back • Polyester B473 White, glossy material Permanent acrylic adhesive Static dissipative adhesive and liner Temperature range from -40ºC to +120ºC Up to +180ºC for shorter period Very good resistance to solvents and chemicals – For use on circuit boards and other sensitive components – – – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester Available materials Back • Polyester B483 – White, glossy material – Permanent, very aggressive, rubber based adhesive – Temperature range from -40ºC to +120ºC – Very good resistance to solvents and chemicals – For use on all flat surfaces, especially where extra durable adherence is a demand (rough, textured, powder coated...
BMP71 – Material information – Polyester Available materials Back • Polyester B486 – Metallized, matte material – Permanent, very aggressive, rubber based adhesive – Temperature range from -40ºC to +120ºC – Very good resistance to solvents and chemicals – For use on all flat surfaces, especially where extra durable adherence is a demand (rough, textured, powder coated...
BMP71 – Material information – Polyester Available materials Back • Polyester B488 White, matte material Permanent acrylic adhesive Temperature range from -40ºC to +160ºC Very good resistance to solvents and chemicals – Aggressive adhesive that adheres well to rough surfaces – For flat surfaces, for example component and product identification and where high temperature durability is needed – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester Available materials Back • Polyester B489 White, matte material Permanent rubber based adhesive Temperature range from -40ºC to +120ºC Very good resistance to solvents and chemicals – Aggressive adhesive that adheres well to rough surfaces – For flat surfaces, for example component and product identification – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester (EPREP) Available materials Back • Polyester/foam plate B7593 (EPREP) – Engraved plate replacement solution – Glossy polyester material mounted on a compressible foam plate – Permanent acrylic adhesive – Very good resistance to solvents, chemicals, UV-light and wearing – Temperature range from -40ºC to +100ºC – Approved by Norsk Veritas for permanent attachment Internet link to Techncial Data Sheet (click)
BMP71 – Material information – Vinyl Available materials Back • Vinyl B351 – White, matte material – Permanent acrylic adhesive – Tamper evident material.
BMP71 – Material information – Vinyl Available materials Back • Vinyl B352 – Metallized, matte material – Permanent acrylic adhesive – Tamper evident material.
BMP71 – Material information – Vinyl Available materials Back • Vinyl B427 – White/transparent or yellow/transparent mtrl – Permanent acrylic adhesive – Print on the coloured part, wind around the cable → the text is overlaminated – Temperature range from -70ºC to +70ºC after overlamination – Very good resistance to water, solvents and chemicals after overlamination – For cable and wire identification.
BMP71 – Material information – Vinyl Available materials Back • Vinyl B498 – – – – – Semi-gloss vinyl cloth Removable rubber based adhesive Repositional after removal Temperature range from -40ºC to +82ºC For temporary product identification where you also might have need for saving or reposition the label after it’s been removed.
BMP71 – Material information – Vinyl Available materials Back • Vinyl B580 – Highly glossy material available as standard in various colours – Permanent acrylic adhesive – Vinyl material for indoor and outdoor use – Temperature range from -40ºC to +82ºC – Can be applied down to -18ºC – For safety and informatiorial identification both indoors and outdoors Internet link to Technical Data Sheet (click)
BMP71 – Material information – Vinyl Available materials Back • Vinyl B7696 – White, glossy and rigid tag material – Used as inserts for the Brady Durasleevecarriers (bought separately) – Temperature range from -40ºC to +70ºC Internet link to Technical Data Sheet (click)
BMP71 – Material information – Nylon Available materials Back • Nylon B499 White, matte nylon cloth Permanent, acrylic adhesive Temperature range from -70ºC to +90ºC Used for cable and wire identification and for rough surfaces – Halogen-Free – Not for applications requiring durability against very harsh solvents and chemicals – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyolefin Available materials Back • Polyolefin B341 – – – – – – White or yellow, matte material Heat shrinkable Shrink ratio 2:1 Insulating Temperature range from -40ºC to +130ºC For cable and wire identification and for insulation purposes Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyolefin Available materials Back • Polyolefin B342 – – – – – – White or yellow, matte material Heat shrinkable Shrink ratio 3:1 Insulating Temperature range from -55ºC to +135ºC For cable and wire identification and for insulation purposes Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyethylene Available materials Back • Polyethylene B109 White, matte laminated tag material No adhesive Temperature range from -40ºC to +80ºC Very good resistance to wearing, solvents, chemicals and low temperatures – Zero halogene – For cable identification, inventory, and much more – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyethylene Available materials Back • Polyethylene B145 Grey, matte, laminated tag material With adhesive for folding purposes Temperature range from -40ºC to +100ºC Extremely tear resistant Zero halogen Doubleside printable.
BMP71 – Material information – Polyethylene Available materials Back • Polyethylene B7599 – – – – – – Rapido wire identification Yellow, glossy tag material Temperature range from -40ºC to +50ºC Good resistance to wearing and solvents For cable identification Halogen-Free Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyimide Available materials Back • Polyimide B426 Amber, matte material Permanent acrylic adhesive Temperature range from -70ºC to +300ºC Up to +350ºC during shorter periods Very good resistance to solvents and chemicals – For PCB-identification, both top and bottom side – – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyimide Available materials Back • Polyimide B457 White, glossy material Permanent acrylic adhesive Temperature range from -70ºC to +300ºC Up to +350ºC during shorter periods Very good resistance to solvents and chemicals – For PCB-identification, both top and bottom side – – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyimide Available materials Back • Polyimide B477 – White, glossy material – Permanent acrylic adhesive – Static dissipative adhesive, liner and package – Temperature range from -70ºC to +300ºC – Up to +350ºC during shorter periods – Very good resistance to solvents and chemicals – For PCB-identification, both top and bottom side Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyimide Available materials Back • Polyimide B478 – White, glossy material – Permanent acrylic adhesive – Static dissipative adhesive, liner and package – Thin material – Temperature range from -70ºC to +300ºC – Up to +350ºC during shorter periods – Very good resistance to solvents and chemicals – For PCB-identification, top side/bottom side – Halogen-Free Internet link to Technical Data Sheet (click)
BMP71 – Material information – Paper Available materials Back • Paper B424 – – – – White, matte material Permanent rubber based adhesive Temperature range from -40ºC to +50ºC Low price alternative for standard applications Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polypropylene Available materials Back • Polypropylene B412 – White, matte tag material – Temperature range from -40ºC to +100ºC – Very good resistance to solvents and chemicals – Desi-strip Inserts – Halogen-Free Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polypropylene Available materials Back • Polypropylene B425 – White, matte material – Permanent acrylic adhesive – Temperature range from -40ºC to +100ºC Up to 130ºC for shorter periods – Very good resistance to solvents and chemicals – P and T shaped constructions – For identification of fiber optic cables and other thin cables needing a flag label in order to be able to read the information – Halogen-Free Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polypropylene Available materials Tillbaka • Polypropylene B529 – – – – White, matte material Permanent acrylic adhesive Temperature range from -40ºC to +100ºC Economical alternative for indoor labelling Internet link to Technical Data Sheet (click)
BMP71 – Material information – PUR Available materials Back • Thermoplastic Polyether Polyurethane B7643 – Yellow wire and cable ID tag material – To be attached with cable ties – Usable from -40ºC to +90ºC – Zero-halogene – Flame-retardant – Good resistance to solvents and chemicals – For identification of cables and cable bundles Internet link to Technical Data Sheet (click)
BMP71 – Material information – Polyester Available materials Tillbaka • Polyester B582 Phosphorescent, glossy material Photoluminescent Permanent acrylic adhesive Temperature range from -40ºC to +80ºC Good resistance to solvents and chemicals – For indoor identification where there is need to see and identify exits, emergency routes, safety equipment, fire alarms, in darkness – – – – – Internet link to Technical Data Sheet (click)
BMP71 – Material information – Vinyl Available materials Tillbaka • Vinyl B584 – – – – – – White, yellow or orange, glossy material Permanent acrylic adhesive Reflective Temperature range from -40ºC to +82ºC For indoor/outdoor use For all identification where reading in low-light conditions is needed Internet link to Technical Data Sheet (click)
