User Manual

BMP
®
61 User’s Manual 78
Label Types
Vial
6. In the # of Strips field, enter the number of strips (labels) to be created in the block
configuration chosen.
Note: If serializing the data, additional strips will continue the serialization from the last number of
the previous strip. Example: When requesting two strips of a 4-pair configuration, the first
strip will contain values 1-12, the second strip will contain numbers 13-24.
7. When finished, tap OK.
Vial
The Vial label type can be used with any label supply except SelfLam or Permasleeve. (If SelfLam or
Permasleeve label supply is installed, the Vial label type does not display.) The Vial label type fixes the
length of the label based on the vial size selected and formats the data horizontally or vertically.
To create a label using the Vial label type:
1. Press Label Type.
2. Select Vial, then select the vial size.
3. Enter the data to display on the vial label.
Note: To create a duplicate label, refer to “Duplicate Label or Area” on page 41.
Landscape (horizontal on printed label) Portrait (vertical on printed label)