User Manual

BMP

61 User’s Manual 7

Introduction

Quick Charger

The battery quick charger is an accessory that can be purchased through your BMP

61 distributor.

While the battery is charged from inside the printer when the AC adapter is attached, there may be

times when you want to have another battery fully charged and ready to use when the AC adapter is

not available. To charge a battery outside the printer, use the BMP-41-QC Quick Charger. The Quick

Charger includes the charger, an AC adapter and an electrical cord.

1. Insert the round end of the adapter cable into

the plug-in port on the back of the quick

charger.

2. Plug the female end of the electrical cord into

the opposite side of the adapter. Plug the

male end of the electrical cord into an

electrical outlet

3. Insert the battery into the charger with the

label facing toward the front of the charger.

The light on the front of the charger appears red

when the battery is not charged. It changes to

green when the battery is fully charged.