Brochure

www.bradyeurope.com
51
Brady Material No. Material Finish Colour Temp (°C)
(Tested for 30 days)
Performance
Attributes
Properties & Applications Approval/Compliance
Min. Max.
B-437 Polyvinylfluoride Matt White -70 °C 135 °C
Polyvinylfluoride label material with matt finish.
Used in wire and cable identification applications
where self-extinguishing features are required.
This label material utilises an adhesive for heavy-
duty applications and is available in continuous
or die-cut formats. Excellent resistance to water,
oil and other common fluids. Also available in
yellow.
MIL-M-87958 Pressure
Sensitive Adhesive Wire
or Cable Marker and
Identification specification
B-439 Vinyl Gloss White -70 °C 80 °C
Coloured vinyl material for thermal transfer
printing. Ideal for rating plates, finished product
identification, and general purpose labelling. Also
available in black, blue, green, orange, purple,
silver and yellow.
–
B-459 Polyester Matt White -40 °C 100 °C
White polyester thermal transfer printable
material with matt finish. Designed for
applications such as topside of printed circuit
boards and rating plates that utilise high quality/
density alphanumerics, barcodes and graphics.
UL Recognised; CSA
Accepted
B-461
Self-laminating
Polyester
Matt
White/
Transparent
-196 °C 110 °C
Permanent adhesive; suitable for liquid nitrogen
application if material is wrapped around itself,
as in self-lamination; write-on capabilities.
Temperature range increases to 121°C when
used in autoclave process
–
B-473
Static Dissipative
Polyester
Gloss White -40 °C 120 °C
White Polyester with glossy finish used for
printed circuit board and electronic component
post-process labelling. Surface resistivity values
in the recommended range for dissipative ESD
packing materials.
UL Recognised; CSA
Accepted; Meets surface
resistivity values in the
recommended range for
dissipative ESD packaging
materials as defined by
ANSI/ESD S541-2008
(between 10
4
and 10
11
ohms)
B-483 Polyester Gloss White -40 °C 120 °C
White polyester thermal transfer printable
material with glossy finish and aggressive
adhesive specifically designed for powder coated
surfaces.
UL Recognised; CSA
Accepted
B-486B Metallised Polyester Matt Silver -40 °C 120 °C
Metallized polyester thermal transfer printable
material, ideal for indoor product labeling, asset
tracking and general ID on very rough surfaces.
UL Recognised; CSA
Accepted
B-488 Polyester Matt White -40 °C 145 °C
White polyester thermal transfer printable
material, similar to B-423, but with matt finish.
Widely used for component identification,
barcoding, asset and inventory tracking.
UL Recognised; CSA
Accepted
B-489A Polyester Matt White -40 °C 120 °C
White polyester thermal transfer printable
material, similar to B-483, but with matt finish.
Agressive adhesive specifically designed for
powder coated surfaces.
UL Recognised; CSA
Accepted
B-490
Freezerbondz™
Polyester
Matt White -196 °C 130 °C
Can be applied to frozen surfaces including
glass and polypropylene stored in liquid nitrogen,
except for Vial Tops. Material must slightly
overlap itself.
–
B-498 Vinyl Cloth
Semi-
gloss
White -40 °C 80 °C
White vinyl cloth label material with glossy finish.
The adhesive and cloth backing give excellent
holding power, while being repositionable and
removing cleanly.
UL Recognised
B-499 Nylon Cloth Matt White -40 °C 90 °C
Nylon cloth material with matt finish. The
adhesive allows labelling in environments with
heat, cold, oil and dirt. Also available in yellow.
UL Recognised; CSA
Accepted; Halogen Free
(DIN VDE 0472/part 815)
Approvals are for White
material only
B-642 Polyvinylfluoride Matt
White/
Transparent
-70 °C 120 °C
Applications requiring self-extinguishing
identification. Self-laminating, wire, cable and
laboratory vial marking. Excellent abrasion and
smudge resistance.
–
Master material index