User Manual

BMP
®
61 User’s Manual 45
Formatting
Labels and Areas
Vertical Text
In Vertical text, each character drops down a line below the preceding character.
Example: The word “WIRE” as vertical text displays as such:
W
I
R
E
Vertical text can only be applied to an area or a label. It cannot be applied line-by-line.
To format text vertically:
1. Navigate to the label or area where you want to display text vertically.
2. Press Label.
OR
Press FN and Area.
3. Choose Vertical > On.
If more than one line of text is present, subsequent lines of text display vertically to the right of the first
line of text.
Note: The horizontal and vertical justification set before applying vertical formatting is carried over
to the vertical lines of text.
Figure 3-8. Multi-line vertical alignment
Multiple lines, before applying Vertical text
(autosized)
Multiple lines, after applying Vertical text (autosized)