User Manual

BMP
®
61 User’s Manual 43
Formatting
Labels and Areas
To rotate data:
1. Navigate to the label or area where rotation will take affect.
2. To set rotation for the label, press Label.
OR
To set rotation for an area, press FN and Area.
3. Choose Rotate and select the degree of rotation.
Rotated data is autosized to accommodate the height versus the width of the label.
Rotation does not display on the editing screen, although the degree of rotation is displayed in the
upper left corner of the screen. To view the actual rotation use “Print Preview” on page 65.
Frame
Note: This feature only works with continuous label supply.
A frame (border) can be added to an area or a label, but not to a line of text. You can have a different
frame, or no frame, on individual labels in a multi-label file. You can also place a frame on a label that
contains area frames.
Note: Frames can only be placed on continuous labels, not die cut labels.
Figure 3-6. Available frame options
1. To add a frame to a label, press Label.
OR
To add a frame to an area, press FN and Area.
2. Choose Frame and select the frame type.
Rectangle
Narrow
Rounded
Narrow
Rectangle
Medium
Rectangle
Wide
Rounded
Medium
Rounded
Wide