User Manual

BMP
®
61 User’s Manual 16
Introduction
Loading Supplies
B-593 Raised Panel Labels
1. Open the printer and insert an empty BMP
®
61 label
spool into the printer. (See instructions in “Label
Supply” on page 13.)
2. Keeping the label supply in the box, place the box
behind the printer, then feed the leading edge of the
B-593 labels through the external feed path, over
the label spool and through the guide slots until it
stops.
3. Turn the power on.
4. Press FEED.
5. Leave roll door open during printing.