User Manual

BMP

61 User’s Manual 12

Introduction

Loading Supplies

Ribbon

The BMP

61 printer comes with the ribbon installed.

Removing

IMPORTANT! Load the ribbon BEFORE loading label supply to avoid damage to the ribbon.

1. Before inserting, remove any ribbon slack by rotating the take-up spool end clockwise.

2. Carefully slide the ribbon cartridge into the printer until it seats firmly against the metal frame,

then flip the print head lock lever forward (to the left) to re-engage the print head.

1. Flip the print head lock lever backward (to

the right) to disengage the print head.

2. Grasp the ribbon and gently slide out of

printer.