Brochure

www.bradyeurope.com
49
This section provides a quick reference to Brady materials listed throughout this catalogue, including basic attributes, applications
and regulatory compliance where applicable. For more detailed material attribute and performance information, please refer to the
material’s Technical Data Sheet, listed at www.bradyeurope.com/tds.
Brady Material No. Material Finish Colour Temp (°C)
(Tested for 30 days)
Performance
Attributes
Properties & Applications Approval/Compliance
Min. Max.
B-109 Polyethylene Tag Matt White -40 °C 49 °C
White polyethylene tag material with matt finish.
Excellent multi-purpose tag for identifying
multiconductor cables, inventory, safety warning
repair and work-in-processing manufacturing.
Good weatherability, humidity resistance and
legibility after solvent exposure.
–
B-145 Polyethylene Tag Matt Grey -40 °C 100 °C
This multipurpose material can be used for a
variety of tag applications including identification
of multiconductor cables, equipment, safety
warning repair and work in progress.
–
B-321
Heat-shrink
Polyolefin Sleeve
Matt White -40 °C 120 °C
Heat-shrinkable; excellent resistance to oil
and solvents. Ink-receptive coating provides
permanent legibility. Applications requiring sleeve
markers, computer-printable.
Meets MIL-M-81531; MIL-
STD-202, Method 215J
B-342
Heat-shrink
Polyolefin Sleeve
Matt White -55 °C 130.6 °C
3:1 ratio heat shrinkable wire marking sleeve
that fits snugly around wires for identification and
protection. Fade-resistant and flame retardant.
Also available in yellow and black.
UL Recognised to UL224;
SAE-AMS-DTL-23053/5 C
(Class 1); SAE-AS-81531
B-345
High Temperature
Heat-shrink
Polyvinylidene
Fluoride Sleeve
Matt White -70 °C 130.6 °C
2:1 ratio heat shrinkable wire marking sleeve
specifically designed for high temperature and
low vacuum outgassing applications. These heat
shrinkable wire marking sleeves are made from
irradiated high temperature PVDF. Also available
in black.
NASA SP-R-0022A
Outgassing Performance;
SAE-AMS-DTL-23053/18
(Class 2); SAE-AS-81531;
MIL-STD-202G Method
215K
B-362
Tamper-resistant
Metallised Vinyl
Gloss Silver -70 °C 80 °C
Designed to fracture easily in order to show signs
of product tampering and to prevent one-piece
label removal. Use caution when removing from
liner as material is fragile.
–
B-390 Rigid Insert Matt White -40 °C 100 °C
Designed to be printed and affixed to a wire
using extruded, clear PVC Brady Wire Marking
Carriers.
Halogen Free (DIN VDE
0472/part 815)
B-403 Paper Matt White -40 °C 78 °C –
B-412 Polypropylene Tag Matt White -40 °C 100 °C
White polypropylene tag material with matt
finish. Offers high print legibility and high tensile
strength.
–
B-422 Polyester Gloss White -40 °C 100 °C
Designed to withstand solvent exposure. Used for
component identification, barcoding, asset and
inventory tracking.
UL Recognised; CSA
Accepted
B-422/B-
966B
Polyester Gloss White -40 °C 100 °C
Supplied with a separate overlaminate mounted
onto the liner underneath the label to allow for
the label to be printed first.
–
B-423 Polyester Gloss White -70 °C 110 °C
Widely used for component identification,
barcoding, asset and inventory tracking.
UL Recognised; CSA
Accepted; AGA Approved;
Halogen Free (DIN VDE
0472/part 815)
Master material index
For more information about about our product performance
icons, see page 14.
WorkHorse™
Labels
MetaLabel™
Series
ToughBond™
Series
Defender™
Series
CleanLift™
Series
UltraTemp™
Series
Abrasion
resistance
Electrostatic
dissipative
Fuel/oil
resistance
High heat
resistance
Low
temperature
resistance
Removable
Solvent/
chemical
resistance
Tamper-
indicating
Ultra-
aggressive
adhesive