User Manual

BMP

61 User’s Manual 84

Maintenance and Troubleshooting

Replacing the Cutter Blade Cover

If the printer is accidentally dropped, the cutter blade cover may come loose or fall out. If the blade

cover is not dented or damaged, re-insert the blade cover into the printer.

To re-insert the cutter blade cover:

1. Grasp the blade cover from the top with the cut-out portion of the blade facing the display

screen (away from the label supply well).

2. Pull the black flap forward, then insert the blade tight up against the black flap with the metal

tabs fitting over the outside of the cutter housing.

Side of cutter housing

Back flap

Side of cutter housing

Cutter blade cover

Metal tabs