User Manual

BMP
®
61 User’s Manual 77
Label Types
110-Block, Bix Block
The following example displays the areas based on the Block Type selected (2-pair, 3-pair,
4-pair, 5-pair, or blank). The “Blank” strip is formatted as two areas covering the full printable
length of the strip.
3. In the Block Type field, from the drop down list, select the pair configuration to use.
Sequence Type is used to determine how, and if, you want to serialize data. If None is
selected, the areas are blank and you can independently enter data in each area of the strip.
Horizontal increments one number per area, based on the start value.
In Backbone serialization, the left-most area on each strip prints with two numbers. The first
number is left-justified; the second number is right-justified. All other areas print with one right-
justified number.
4. In the Sequence Type field, from the drop down list, select the Sequence Type to use.
5. In the Start Value field (except when “None” is selected in the Sequence Type field), enter the
first number of the sequence.
None
2 pair
Blank
Text entered in area 1 prints here
Text entered in area 2 print here
2 pair - none
2 pair - horizontal
2 pair - backbone