User Manual

BMP

61 User’s Manual 15

Introduction

Loading Supplies

Loading Bulk Label Supply

1. Remove the BMP

61 label spool and the label feed

ramp from the box.

2. On the bulk label supply box, push tabs B and C in,

then pull the perforated flap down and tear off.

3. Attach the label feed ramp to the bottom of the

perforation, with the ramp arms on the outside of the

box.

4. Attach the ramp hooks to the outside of the bulk

label feed path on the printer.

5. Insert the BMP

61 label spool (smart cell facing left)

into the printer. Adjust the media guide as needed.

6. Pull the loose end of the bulk label supply out of the

box punch-out and thread over the tray and into the

bulk label feed path on the printer.

7. Continue to feed the leading edge of the label roll over the spool and through the guide slots until it catches.

8. Turn the printer on and press FEED to feed the label supply through the printer.

9. Close the cover.

Label

Spool

Label Feed Ramp