User Manual

BMP
®
61 User’s Manual 14
Introduction
Loading Supplies
Unloading
1. To open the printer cover, put your thumb
under the finger tab and push up.
2. Flip the print head lock lever backward (to
the right) to disengage the print head.
3. If label spool is not empty, gently rewind the
spool with your finger to back the unused
labels out from under the print head.
4. Grasp the smart cell handle and gently pull
up out.
5. If you do not want to load any more label supply, close the printer cover by pressing down
until it catches.