User Manual

BMP
®
61 User’s Manual 99
Maintenance and Troubleshooting
Troubleshooting
Program
File incompatible with installed
label supply.
A saved file (or power off file)
was designed for label supply
not currently installed.
Install correct label supply.
Incompatible label supply for
chosen application.
The labels installed cannot
accommodate the application
requirements. (Example,
attempting to run a 110-Block
application on die cut labels.)
Install correct label supply.
Invalid terminal repeat value
entered.
The value entered is out of the
range.
The acceptable range is
between the minimum of 0.2
inch to the maximum of 40
inches.
No applications available. Applications not selected. Ensure that the desired
applications are activated.
Press Setup.
Choose Apps.
Navigate to the desired
applications and press [OK] to
place a check mark in front of
each application.
Navigate to the OK button and
press [OK].
Problem Cause Corrective Action