Brochure

52
Brady Material No. Material Finish Colour Temp (°C)
(Tested for 30 days)
Performance
Attributes
Properties & Applications Approval/Compliance
Min. Max.
B-717 Polyimide Gloss White -70 °C 300 °C
White polyimide material with glossy finish and
ultra-durable adhesive. Used in printed circuit
board and electronic component pre-process
labelling. Designed for use with extreme wash
protocol and cleaning chemicals. Surface
resistivity values in the recommended range for
dissipative ESD packing materials.
UL Recognised; Meets
the requirements ofANSI/
ESD S541-2008(between
10
4
and 10
11
ohms) for
dissipative ESD packaging
materials; Meets the
performance requirements
ofMIL-STD-202G, Method
215K
B-718 Polyimide Gloss White -70 °C 300 °C
White polyimide material, low profile (1 mil
thickness), with glossy finish and ultra-durable
adhesive. Used in printed circuit board and
electronic component pre-process labelling.
Designed for use with extreme wash protocol
and cleaning chemicals. Surface resistivity values
in the recommended range for dissipative ESD
packing materials.
UL Recognised; Meets
the requirements ofANSI/
ESD S541-2008(between
10
4
and 10
11
ohms) for
dissipative ESD packaging
materials; Meets the
performance requirements
ofMIL-STD-202G, Method
215K
B-719 Polyimide Matt White -70 °C 300 °C
White polyimide material with matt finish and
ultra-durable adhesive. Used in printed circuit
board and electronic component pre-process
labelling. Designed for use with extreme wash
protocol and cleaning chemicals. Surface
resistivity values in the recommended range for
dissipative ESD packing materials.
UL Recognised; Meets
the requirements ofANSI/
ESD S541-2008(between
10
4
and 10
11
ohms) for
dissipative ESD packaging
materials; Meets the
performance requirements
ofMIL-STD-202G, Method
215K
B-724 Polyimide Matt Amber -70 °C 300 °C
Amber polyimide material with matt finish and
ultra-durable adhesive. Used in printed circuit
board and electronic component pre-process
labelling. Designed for use with extreme wash
protocol and cleaning chemicals.
Meets the performance
requirements of MIL
-STD-202G, Notice 12,
Method 215K; Meets
the requirments of SAE
AS81531 Marking of
Electrical Insulating
Material
B-727 Polyimide Gloss White -70 °C 300 °C
White polyimide material with glossy finish and
ultra-durable adhesive. Used in printed circuit
board and electronic component pre-process
labelling. Designed for use with extreme wash
protocol and cleaning chemicals.
UL Recognised; Meets the
performance requirements
of MIL -STD-202G,
Notice 12, Method 215K;
Dibutyltin and Dioctyltin
free.
B-7351
Tamper-resistant
Vinyl
Satin White -40 °C 80 °C
White vinyl material with matt finish. Tamper
evident material fractures to show signs of
product tampering and prevent one-piece
removal.
–
B-7425 Polypropylene Matt Black on White -80 °C 70 °C
White Polypropylene material. Ideal for laboratory
identification such as vials, centrifuge tubes
and test tubes. For freezer or liquid nitrogen
applications, B-7425 must be applied prior to
being frozen.
–
B-7546
Tamper-evident
Polyester
Gloss White -20 °C 100 °C
White polyester material with glossy finish.
Leaves a “VOID footprint on the surface. The
adhesive does not allow for repositioning to
prevent it from being reused.
UL Recognised; CSA
Accepted
B-7551 Polyester Matt Clear -20 °C 70 °C –
B-7576
Tamper-evident
Metallised Polyester
Matt Silver -70 °C 100 °C
Metallised polyester material with matt finish.
Leaves a “VOID” footprint on the surface when
removed; the pattern also appears on the top of
the label to prevent it from being reused.
UL Recognised
B-7593
Polyethylene Foam
Laminate Polyester
Gloss White -40 °C 100 °C
Thermal transfer printable raised panel labels.
Designed to make legend plate creation quick,
less expensive, and hassle free! Use for electrical
components, electrical cabinets, push buttons,
patch panels, and any other applications you
can imagine. This material can also be used for
rating and serial plates using alphanumerics
that require name plate quality. Also available in
black, green, red, silver and yellow
–
B-7597 Polyethylene Tag Matt White -40 °C 100 °C
Polyethylene tag material. Resists tearing and the
topcoat resists smudging and abrasion. Halogen
free material. Also available in yellow.
Halogen Free (DIN VDE
0472/part 815)
Master material index