User Manual

30
Master material index
Brady
Material No.
Material Finish Colour Temp (°C)
(Tested for 30 days)
Performance
Attributes
Properties & Applications Approval/Compliance
Min. Max.
B-481
StainerBondz™
Polyester
Matt White -80 °C 130 °C
White polyester will remain resistant when ex-
posed to xylene and other chemicals that are
commonly used in the slide staining process
–
B-482 Polyester Matt White
The B-482 label material, combined with
Brady’s R6400 ribbon, provides the durability
and print quality that histology and anatomic
pathology labs need for accurate, identifi-
able specimen labelling. Paraffin and solvent
resistant.
–
B-483 Polyester Gloss White -40 °C 120 °C
White polyester thermal transfer printable
material with glossy finish and aggressive
adhesive specifically designed for powder
coated surfaces.
UL Recognised; CSA
Accepted
B-488 Polyester Matt White -40 °C 145 °C
White polyester thermal transfer printable
material, similar to B-423, but with matt finish.
Widely used for component identification,
barcoding, asset and inventory tracking.
UL Recognised; CSA
Accepted
B-490
Freezerbondz™
Polyester
Matt White -196 °C 130 °C
Can be applied to frozen surfaces including
glass and polypropylene stored in liquid
nitrogen, except for Vial Tops. Material must
slightly overlap itself.
–
B-492
Freezerbondz™
Polyester
Matt White -196 °C 110 °C
Ultra thin; can label frosted/frozen (with
overlap) or room temperature labels and lasts
in liquid nitrogen and hot water baths
–
B-498 Vinyl Cloth
Semi-
gloss
White -40 °C 80 °C
White vinyl cloth label material with glossy fin-
ish. The adhesive and cloth backing give excel-
lent holding power, while being repositionable
and removing cleanly.
UL Recognised
B-499 Nylon Cloth Matt White -40 °C 90 °C
Nylon cloth material with matt finish. The
adhesive allows labelling in environments with
heat, cold, oil and dirt. Also available in orange,
red and yellow.
UL Recognised; CSA
Accepted; Halogen Free
(DIN VDE 0472/part
815) Approvals are for
White material only
B-584 Reflective Tape Gloss Orange -40 °C 70 °C
Suitable for outdoor use. Also available in silver
and yellow.
–
B-595 Vinyl Gloss White -40 °C 82 °C
Durable, low-shrink vinyl with our most
aggressive adhesive. Conforms to irregular,
curved, rough and highly textured surfaces
(painted cinder blocks, uneven wood, textured
plastics, paper-jacketed pipes, powder-coated
surfaces). Adheres to “difficult” low-surface
energy items (PVC piping, blow-moulded
equipment cases, ABS plastics, recycled plas-
tics). Available in a wide range of colours.
BS5609:1986 Section 2
and section 3
B-7641
Heat-shrink Poly-
olefin Sleeve
Matt White -55 °C 105 °C
2:1 ratio heat shrinkable, zero halogen wire
marking sleeves. The wire marking sleeves
offer outstanding fire safety properties and
minimal smoke emission. Also available in
yellow.
BS-6853 (1999) Vehicle
Category 1A; EN-
45545-2, requirement
24, Vehicle Category
HL3; Zero Halogen
WorkHorse™
Labels
MetaLabel™
Series
ToughBond™
Series
Defender™
Series
CleanLift™
Series
UltraTemp™
Series
Abrasion
resistance
Electrostatic
dissipative
Fuel/oil
resistance
High heat
resistance
Low temperature
resistance
Removable
Solvent/chemical
resistance
Tamper-indicating
Ultra-aggressive
adhesive