User guide

English
56
5. Advanced Functions
User graphics must be in black and white AND in BMP,
JPEG, or PNG format (i.e. with bmp, jpg, or png file
extensions). They must not exceed 10 Kbytes in file size
and 110x110 dots in picture size. If they are in color, the
LCD display will be in color. However, the printouts will be
in black and white, and may not match the original
colored graphics.
J. USB Flash Drive Connection
To perform firmware upgrade with a flash drive:
1 Insert the USB
flash drive into
the USB port on
the left side of
the printer as
shown in the
diagram.
2 Enter [Menu] > System > “Upgrade through USB drive”.
A warning message appears, asking whether to save the
current job.
3 Press [OK], give an appropriate filename and press
[OK] to save.
The firmware upgrade in the printer begins.
To exit from the USB Drive connection mode to the Tag
editor, press [Close].
K. PC Connection
To connect the BMP
®
91 printer to a PC:
1. Insert the smaller,
squarish end of the
USB cable into the
printer’s socket as
shown here.
2. Plug the other end
(with a rectangular
connector) of the
USB cable into a
USB port on a
personal computer
(PC).
The USB cable on the PC side should be connected to
a standard USB port.
Menu
OK
OK
BMP91UG.book Page 56 Friday, October 14, 2011 7:56 PM