User guide

55
5. Advanced Functions
To name a file, you must use valid characters and at most
10 characters in length. These include numeric digits (e.g.
“0”, “1”, “2”, “3”), lower or uppercase letters (e.g. “a”,
“b”, “c”, “A”, “B”, “C”), underscore (“_”) and hyphen (“-”).
To open a tag file:
1 Enter [File] > “Open”.
2 Select the file from a list (if any) and press [OK].
To delete a tag file:
1 Enter [File] > “Delete”.
2 Select the file from a list (if any) and press [OK].
To import a tag file:
1 Plug a Flash drive into the printer’s USB port.
2 Enter [File] > “Import”.
3 Select the file type.
4 Select the file from a list (if any) and press [OK].
To export a tag file:
1 Plug a Flash drive into the printer’s USB port.
2 Enter [File] > “Export”.
3 Select the file type.
4 Select the file from a list (if any) and press [OK].
To open a CSV file:
1 Import the CSV file. (see earlier instructions on how to import
a tag file)
2 Enter [File] > “Open”.
3 Select the file from a list (if any) and press [OK].
I. User Graphics
To import a user graphics file (or to upload a user file):
1 Plug a USB flash drive into the printer’s USB port.
2 Enter [Menu] > User Graphics > “Import”.
3 Browse to the relevant filename and press [OK].
To insert a user data file (or to load an editing job):
1 Enter [Menu] > User Graphics > “Insert”.
2 Select the file from a list (if any) and press [OK].
To delete a user data file:
1 Enter [Menu] > User Graphics > Delete.
2 Select the file from a list (if any) and press [OK].
File
OK
File
OK
File
OK
File
OK
File
OK
Menu
OK
Menu
OK
Menu
OK
BMP91UG.book Page 55 Friday, October 14, 2011 7:56 PM