User guide

English
52
5. Advanced Functions
To improve readability, you
can add a horiztonal line in
the center of a tag.
To add a centerline for the current tag:
1 Enter [Fn] + [File] > Properties > Set Multiline >
“Centerline”.
2 Select “On” and press [OK].
A horizontal line appears in the center of the current tag when
it is printed.
To start printing, press [PRINT].
To return to the Tag Editor, press [Close].
E. Cutter Settings
By default, the BMP
®
91 printer automatically makes (i) a half cut
(with a cut depth that ranges from “1” to “8”) after the printing of
every segment and (ii) a full cut at the end of every print job.
You can turn off the half cut (per segment) and then turn on the
printing of a cut line (per segment), for example, for manual
cutting later. You can also change the cut depth of the half cuts.
Nevertheless, there will always be a full cut at the end of a print
job. In other words, the last segment will always have a full cut.
To open the Cutter menu:
• Enter [Menu] > Settings > “Cutter”.
Shortcut: Press the [Fn] + [Seg Length] quick keys.
To turn off (or on) half cut per segment:
1 Enter [Fn] + [Seg Length] > Half Cut > “Action”.
The “Action” options appears.
2 Select “Off” (or “On”) and press [OK].
What is a segment? For example, if the print job has only
one tag which is printed once, there will be only one
segment. If the only tag is printed 10 times, there will be
10 segments. If the print job has a set of five tags which
are printed 10 times, there will be 50 segments.
To turn on (or off) the printing of a cut line per segment:
1 Enter [Fn] + [Seg Length] > Half Cut > “Cut Line”
The “Cut Line” options appears.
Line 1
Line 2
Fn
File
OK
PRINT
Menu
Fn
Seg Leng
Fn
Seg Leng
OK
Fn
Seg Leng
BMP91UG.book Page 52 Friday, October 14, 2011 7:56 PM