User guide

51
5. Advanced Functions
If the printout is offset from the nominal position, you can adjust
the lead (for insufficient leading space on the left) or the vertical
spacing (for uneven vertical spacing) through the Tag menu.
To open the Tag menu:
1 Enter [Menu] > Quick Keys > “Tag”.
Shortcut: Press the [Fn] + [File] quick keys.
To adjust the lead for the current tag:
1 Enter [Fn] + [File] > Properties > Printing
Adjustments > “Lead Adjust”.
2 Using the [Up] or [Down] keys, adjust the lead and
press [OK].
To adjust the vertical spacing for the current tag:
1 Enter [Fn] + [File] > Properties > Printing
Adjustments > “Vertical Adjust”.
2 Using the [Up] or [Down] keys, adjust the vertical
spacing and press [OK].
To adjust segment length for the current tag:
1 Enter [Fn] + [File] > Properties > Printing
Adjustments > “Length Adjust”.
2 Using the [Up] or [Down] keys, adjust the segment
length and press [OK].
If the printed text is too light
(e.g. a) or too dark (e.g. b),
you can change the printing
density to “just right” (e.g. c).
To adjust the printing density
for all tags:
1 Enter [Menu] >
Settings > “Printing density”.
2 Select the density you want and press [OK].
The density ranges from “1” (lightest) to “6” (darkest).
lead
segment length
Port 1
vertical spacing
Menu
Fn
File
Fn
File
OK
Fn
File
OK
Fn
File
OK
a
Port 1
c
Port Port 1
b
Port 1 a
Menu
OK
BMP91UG.book Page 51 Friday, October 14, 2011 7:56 PM